COMPLIANCE INFO_2016-2018 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic ❑Other(Spec) Test Equipment Used: Equipment Resolution: Sump# 1-87 Sump#2-87 Sump#3-87 Sump#4-91 Sump Diameter: 48" 48" 48" 48" Sump Depth: 54" 55" 551/255 55 ''/z" Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 13" 25" 13" 13" Highest Piping Penetration: Height from Tank Top to Lowest 18" 23" 25" 21" Electrical Penetration: Condition of sump prior to testing: *See comments *See comments *See comments *See comments Portion of Sump Tested' *See comments *See comments *See comments *See comments Does turbine shut down when sump sensor detects liquid(both Yes Yes Yes Yes product and water)?" Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail-safe Yes Yes Yes Yes shutdown?" Was fail-safe verified to be No No No No o erational?` Wait time between applying water *See comments *See comments *See comments *See comments and starting test: Test Start Time: Initial Reading(RI): Test End Time: Final Reading(Ii Test Duration: Change in Reading(RF-RI): Pass/Fail Threshold or Criteria: Test Result: *Not Tested *Not Tested *Not Tested *Not Tested Was sensor removed for testing? Was sensor properly replaced and verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) *Piping Sumps not tested with this testing event. ` 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"Ni the entire sump must be tested. (See SWRCB 11160)