Laserfiche WebLink
16. V Tanks subject to floatati 9 <br />(Section 2635 (a) (7)l <br />A. Anchored by deadman or stab. <br />B. Anchors to be installed as specified by manufacturer. <br />® C. Installation details provided on plans. <br />D. Calculations provided. <br />17. SPILL AND OVERFILL PREVENTION <br />Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spilt <br />containers)/piping sump(s) required, including tank fill and all openings). <br />A. Spill container [Section 2635 (b) (1)l. <br />If made of metal, exterior wall protected from galvanic corrosion. <br />Capacity: (minimum of five gallons) ✓1 <br />Equipped with a drain valve which allows drainage of spilt into primary container. <br />Manufacturer: <br />B. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br />(1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audible <br />and visual alarm [Section 2635(b)(2)(A)l . <br />Manufacturer: Model: <br />(2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than <br />95% capacity and activates an audible alarm at least five minutes before overfill [Section 2635 <br />(b) (2) (B)l. <br />Manufacturer: Model: <br />(3) Provide positive shut off at no more than 95% capacity [Section 2635 (b) (2) (C)l. <br />Manufacturer: 0 F2J Model: <br />(4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br />exposed to the product overfilling [Section 2635 (b) (2) (0)1. <br />Manufacturer: opw Model: <br />18. PIPING INFORMATION <br />PIPING INFORMATION <br />TANK# TANK# TANK# TANK# <br />DISTANCE from <br />DISPENSER to TANK <br />MANUFACTURER <br />® 1� <br />SYSTEM TYPE <br />CONSTRUCTION **QQjaWL <br />wall <br />MATERIAL <br />F. e, A <br />LEAK DETECTION SYSTEM <br />100% METHANOL COMPATIBILITY <br />Ve YES <br />NO <br />CORROSION PROTECTION <br />YES <br />NO <br />* System Type; suction, pressure, and gravity <br />" Construction: single -walled, double -walled, lined -trench, etc. <br />m Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br />7 <br />