Laserfiche WebLink
4. SECONDARY PIPE TESTING <br />Test Method Developed By: ❑ Piping Manufacturer ® Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: ® Pressure ❑ vacuum ❑ Hydrostatic <br />❑ Other (Specify) <br />Test Equipment Used: Test reducer boots, Nitrogen and gauges <br />Equipment Resolution: 0.5% of span <br />_. ,.. ;�' ,fi, `m" <br />.. <br />.; Piping Run #fi 87 <br />Piping Material: <br />Fiberglass <br />Piping Manufacturer: <br />Smith <br />Piping Diameter: <br />3" <br />Length of Piping Run: <br />150, <br />Product Stored: <br />Gasoline <br />Method and location of <br />piping -run isolation: <br />Reducer boots/fittings <br />Wait time between applying <br />pressure/vacuum/water and <br />10 minutes <br />startin test: <br />Test Start Time: <br />12:00 pm <br />Initial Reading (Ri): <br />5 psi <br />Test End Time: <br />1:00 pm <br />Final Reading (RF): <br />5 psi <br />Test Duration: <br />1 hour <br />Change in Reading (RF -RT): <br />None <br />Pass/Fail Threshold or <br />No detectable loss <br />Criteria: <br />Test Result: <br />rx1 Pass Fail <br />Comments -- (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />Repaired Piping to 87 Line <br />