Laserfiche WebLink
1 <br />L- <br />6. Overfill Protection System (spill catchment basins) required) <br />A. Nonmotor vehicle fuels (See Option 1A) <br />1. Level sensing device and N2 or N3 below <br />2. Audible/visual alarm triggered to liquid level sensor <br />3. Automatic shut-off device <br />B. Motor vehicle fuels only <br />1. Manual monitoring <br />a. Written filling procedure provided <br />b. Procedure addresses all of the following: <br />1) Visual monitoring of fuel level and filling operation <br />2) Available ca acity of tank is at 103% or +200 gallons <br />(2635- 9) (A�(B)(C)) <br />3) Metered input <br />C. Spill catchment basin size <br />I. Minimum 5 gallons <br />10. Secondary containers (Includes leak interception and detection systems). <br />A. Backfill in secondary container -(:Article 3, Section 2635) ) <br />1. See Article 3 Section 2635(c) (1-8). <br />B. Two or more.primary containers within seq.m dart' container (Demonstrate <br />product compatibilities). <br />C. Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />D. Water tight cover for secondary container excavation (Article 3, Section <br />2635(7)). <br />11. Piping <br />A. Double containment required for: <br />1. Product and vapor recovery lines. <br />2. Vent line (excluded only if ball float valve is installed). <br />