COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

Page 7 of 9eco� 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑Professional Engineer ❑ Other(Specify) Test Method Used: ❑ Pressure ❑ Vacuum ®Hydrostatic ❑ Other(Specify) Test Equipment Used:Level Change Indicator Equipment Resolution: 0.0025 Fill Sump#87 Fill Sump#87 Fill Sump#91 Fill Sump# SYP Sump Diameter: 42 in 42 in 42 in Sump Depth: 42 in 36 in 27 in Height from Tank Top to Top of 0 in 0 in 0 in Highest Piping Penetration: Height from Tank Top to Lowest 9 in 9 in 9 in Electrical Penetration: Condition of sump prior to Dry Dry Dry testing: Portion of Sump Tested 2"above sump collar 2"above sump collar 2"above sump collar Sump Material: Fiberglass Fiberglass Fiberglass Wait time between applying 5 min 5 min 5 min pressure/vacuum/water and starting test: Test Start Time: 2:05 PM 1:35 PM 2:10 PM Initial Reading(Rj): 0 0 0 Test End Time: 2:35 PM 2:05 PM 2:40 PM Final Reading(RF): 0 0 0 Test Duration: 30 min 30 min 30 min Change in Reading(RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: 0.0025 0.0025 0.0025 Test Result: ® Pass ❑Fail ® Pass ❑;Fail ;® Pass ❑Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ®Yes ❑No ®Yes [:]No ®Yes [-]No ❑Yes [:]No Does the sensor alarm when either product or water is ❑Yes❑No❑NA ®Yes❑No❑NA ®Yes[:]No[—INA ❑Yes❑No❑NA detected? Was sensor removed for testing? ®Yes[:]No❑NA ®Yes❑No❑NA ®Yes[:]No❑NA ❑Yes[:]No[—INA Was sensor properly replaced and ® ❑ verified functional after testin ? Yes No❑NA ®Yes❑No❑NA ®Yes[:]No[:INA ❑Yes[:]No[:INA Comments—(include information on repairs made prior to testing, and recommended,follow-up for failed tests) Fill Sump(s) sensor(s)were tested separately as part of the annual monitor certification test.