COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

0 0 ec V/ Page 7 of 9 IM I 111 N -1101 ItIrerelim►1l rNMINULT' ► Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specify) Test Equipment Used: Level Change Indicator Equipment Resolution: 0.0025 ` Fill Sump # 87` Fill Sump # 87 SYP Fill Sump # 91 Fill Sump # Sump Diameter: 42 in 42 in 42 in Sump Depth: 42 in 36 in 27 in Height from Tank Top to Top of Highest Piping Penetration: 0 in 0 in 0 in Height from Tank Top to Lowest Electrical Penetration: 9 in 9 in 9 in Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested 2" above sump collar 2" above sump collar 2" above sump collar Sump Material: Fiberglass Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and starting test: 5 min 5 min 5 min Test Start Time: 9:35 AM 10:40 AM 9:50 AM Initial Reading (Rj): 0 0 0 Test End Time: 10:05 AM 11:20 AM 10:20 AM Final Reading (RF): 0 0 0 Test Duration: 30 min 30 min 30 min Change in Reading (RF-Rj): 0 0 0 Pass/Fail Threshold or Criteria: 0.0025 0.0025 0.0025 Test Result: ®`Pass ❑ Fail ® Pass ❑ Fail ® Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ®Yes ❑No ®Yes [-]No ®Yes ❑No ❑Yes [:]No Does the sensor alarm when either product or water is detected? ®Yes ❑No ❑NA ®Yes [:]No [:INA ®Yes ❑No ❑NA ❑Yes ❑No [—INA Was sensor removed for testing? ®Yes [:]No ❑NA®Yes [:]No[—INA ❑Yes ❑No ENA Oyes [:]No❑NA Was sensor properly replaced and verified functional after testing? ®yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA [:]Yes❑No ❑NA Comments — (include information on repairs made prior to testing, and recommended folloli,-up for failed tests) " Fill Sump(s) sensor(s) were tested separately as part of the annual monitor certification test.