Laserfiche WebLink
f� <br />0 PRYCO, INC. <br />ELECTRICAL (Continued) <br />Option <br />Code <br />213 <br />CRITICAL HIGH FUEL ALARM w/PUMP MOTOR SHUTDOWN — This switch/ <br />alarm assembly prevents tank overfilling when the fuel level reaches a critical high <br />level - normally 3 -inches from the top of the tank or 103%. <br />Tanks with a pump / motor system — a separate float switch activates a red <br />alarm light on the tank control panel, shuts down pump motor(s), and closes a nor- <br />mally open solenoid valve that is installed at fuel inlet. To specify solenoid valve <br />i <br />voltage and inlet pipe size, use option codes 213A thru 213H shown below. <br />213A <br />1/2" NPT Fuel Line -120 vac <br />213B <br />1" NPT Fuel Line -120 vac <br />213C <br />1-1/2" NPT Fuel Line -120 vac <br />213D <br />2" NPT Fuel Line -120 vac <br />213E-12 <br />1/2" NPT Fuel Line -12 vdc <br />213E-24 <br />1/2" NPT Fuel Line -24 vdc <br />213F-12 <br />1" NPT Fuel Line -12 vdc <br />213F-24 <br />1" NPT Fuel Line -24 vdc <br />213G-12 <br />1-1/2" NPT Fuel Line -12 vdc <br />213G-24 <br />1-1/2" NPT Fuel Line -24 vdc <br />213H-12 <br />2" NPT Fuel Line -12 vdc <br />213H-24 <br />2" NPT Fuel Line -24 vdc <br />Manual -fill and Subbase Tanks (no pump/motor system installed) — a sepa- <br />rate float switch activates a red alarm light on the tank control panel. <br />Specify: 213M for 120 vac, <br />213M-12 for 12 vdc, or <br />213M-24 for 24 vdc. <br />214 <br />EXPLOSION PROOF FLOAT SWITCH — This switch assembly has the same <br />functionality as our standard float switch but all components are explosion proof, <br />except the contactor, which is housed within an explosion proof enclosure. <br />215 <br />FLOAT VALVE — This option is used when a day tank is gravity fed from a main <br />storage tank. Although technically it is not an electrical item, it replaces the stan- <br />dard float switch (option 217). Therefore, there is no electrical level control and <br />annunciation directly associated with this option. <br />216 <br />CIRCUIT BREAKER — This option, which includes the breaker(s) and an enclo- <br />sure, is used to protect pump motors. The actual breaker is sized according to the <br />ampere draw of the motor(s) and voltage. Standard breaker sizes are: <br />216-1-10 <br />Single pole, Single Phase, A/C — 10 Amp. <br />216-1-15 <br />Single pole, Single Phase, A/C —15 Amp. <br />216-1-20 <br />Single pole, Single Phase, A/C — 20 Amp. <br />216-1-30 <br />Single pole, Single Phase, A/C — 30 Amp. <br />216-2-15 <br />Double pole, Single Phase, A/C —15 Amp. <br />216-3-15A <br />230 vac, Three Phase — 15 Amp. <br />216-3-15B <br />460 vac, Three Phase — 15 Amp. <br />216 -DC <br />All D/C motors - Up to 30 Amp. <br />P.O. Box 108, Mechanicsburg, IL 62545 (Phone -217-364/4467 Fax -217-364/4494) Page 13 <br />The content of'this catalog is subject to change without notification. <br />