COMPLIANCE INFO_2009-2012 - Laserfiche WebLink

Home Browse Search

Test Method Developed By: ❑ Sump Manufacturer ❑ Other (Specify) ® Industry Standard ❑ Professional Engineer Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon Sump Tester Equipment Resolution: +/- 0.002" Sump Diameter: Sump Depth: Sump Material: Height from Tank Top to Top of Highest Piping Penetration: Height from Tank Top to Lowest Electrical Penetration: Condition of sump prior to testing: Portion of Sump Tested' Does turbine shut down when sump sensor detects liquid (both product and water)?* Turbine shutdown response time Is system programmed for fail-safe shutdown?* Was fail-safe verified to be Wait time between applying pressure/vacuum/water and starting test: Test Start Time: Initial Reading (RI): Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF -RI): Pass/Fail Threshold or Criteria: Test Result: Was sensor removed for testing? Was sensor properly replaced and verified functional after testine? STP Sump # North 54" 42" Fiberglass 16" 26" STP Sump # South 54" 42" Fiberglass 12" 30" Good IGood 2" above piping 1 2" above piping ❑ Yes ❑ No ® NA 1 ❑ Yes ❑ No ®NA M, N/A ❑ Yes ❑ No ® NA 1 ❑ Yes ❑ No ®NA 30 minutes 12:04 pm 12:19 pm 4.1931 4.1931 12:19 pm 12:34 pm 4.1932 4.1935 15 min 15 min +0.0001 +0.0004 +/-0.002" o Pass ❑ Fail ® Yes ❑No❑NA ❑Yes ® No ❑ NA 30 minutes 12:04 pm 12:19 pm 2.7160 2.7150 12:19 pm 12:34 pm 2.7151 2.7148 15 min 15 nun -0.0009 -0.0002 +/-0.00211 El Pass ❑ Fail ® Yes ❑No❑NA ❑Yes ® No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) "Sensor functionality was not confirmed, sensor was replaced properly. This procedure is not part of the Secondary Containment testing scope of work". ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)