Laserfiche WebLink
a <br /> ® VEEDER-ROOT PRESSURIZED LINE LEAK DETECTION Technical Manual <br /> SITE PREPARATION AND Issued: <br /> w INSTALLATION INSTRUCTIONS s/sa <br /> PRESSURIZED LINE LEAK <br /> DETECTION SYSTEM <br /> for Pumps withDischarge <br /> (For TLS-350 and TLS-35OR Systems) <br /> Form Number 848490-001, -002, -003 <br /> Manual Number 576013-902 <br /> BEFORE YOU START! <br /> At existing sites where a TLS-350 or TLS-350R is already in operation,you will be asked, <br /> for personal and equipment safety reasons,to turn OFF the TLS-350 or TLS-350R system <br /> before beginning any installation procedures for the Line Leak Detector. <br /> BEFORE YOU TURN OFF POWER TO THE TLS-350 OR TLS-350R MONITOR... <br /> be sure to print out or record all setup data which has been entered into the system and all <br /> alarm history and last leak test data which has been stored by the system. In addition, <br /> check to be sure that the Battery Backup Switch is in the ON position. If the Battery <br /> Backup Switch is OFF, all inventory, leak test, setup and alarm history data WILL BE <br /> LOST when AC power to the system is turned OFF. <br /> Refer to the TLS-350 "System Setup Instructions," Manual No. 576013-623 or the TLS- <br /> 350R"System Setup Instructions",Manual No. 576013-880,for information on activating <br /> the Battery Backup feature. Refer to the TLS-350 "System Operating Instructions," Man- <br /> ual No. 576013-610 or the TLS-35OR "System Operating Instructions," Manual No. <br /> 576013-881, for instructions on viewing and printing inventory, leak test, setup and alarm <br /> history data. <br /> UL Listed <br />