COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

Page 4 of 9 3. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specify) Test Equipment Used: See attached testing procedures Equipment Resolution: Sump # 87-1 immm MEN= Sump # 87-2 Sump # 91 000M Sump # Sump Diameter: 48" 48" 48" Turbine shutdown response time Sump Depth: 55" 55" 53" Is system programmed for fail-safe shutdown?` Sump Material & Manufacturer: Fiberglass Fiberglass Fiberglass Was fail-safe verified to be operational?" Height from Tank Top to Top of Highest Piping Penetration: 16" 16" 16" Wait time between applying pressure/vacuum/water and starting test: Height from Tank Top to Lowest Electrical Penetration: 18" 16" 16" Test Start Time: Condition of sump prior to testing: Fair Fair Fair Initial Reading (R1): POrtlOri Of Sum Tested' Sump Above highest penetration Above highest Above highest penetration penetration Above highest penetration Does turbine shut down when sump sensor detects liquid (both product and water)?" ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑ Yes ❑ NO ®NA Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail-safe shutdown?` ❑ Yes ❑ No ® NA ❑Yes ❑ No ®NA ❑Yes ❑ No ®NA ❑ Yes ❑ No ® NA Was fail-safe verified to be operational?" ❑ yes ❑ No ®NA ❑Yes ❑ No ®NA ❑Yes ❑ No ®NA ❑ Yes ❑ No ®NA Wait time between applying pressure/vacuum/water and starting test: 30 minutes 30 minutes 30 minutes 30 minutes Test Start Time: 11:01am 11:01am 11:06am Initial Reading (R1): 4.8129 1.8298 0.8070 Test End Time: 11:16am 11:16am 11:21am Final Reading (RF): 4.8132 1.8298 0.8059 Test Duration: 15 min 15 min 15 min 15 min Change in Reading (RF -R1): 0.00026 0.00001 0.00119 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: Pass ❑ Fail Z' Pass; ❑ Fail ED Pass ❑ Fail ❑ Pass El Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ® Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to �Lny of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)