COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

Page 5 of 9 7. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Test Method Developed By: ❑ UDC Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ Vacuum ® Hydrostatic Test Equipment Used: See attached testing procedures. Equipment Resolution: UDC # 1-2 UDC # 3-4 UDC # 5-6 UDC # 7-8 UDC Manufacturer: UDC Material: Fiberglass Fiberglass Fiberglass Fiberglass UDC Depth: 30" 30" 30" 30" Height from UDC Bottom to Top of Highest Piping Penetration: 10" 10" 10" 10" Height from UDC Bottom to Lowest Electrical Penetration: 5" 5" 5" 5" Condition of UDC prior to testing: Fair Fair Fair Fair Portion of UDC Tested Above highest penetration Above highest penetration Above highest penetration Above highest penetration Does turbine shut down when UDC sensor detects liquid (both product and water)?` ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Turbine shutdown response time n/a n/a n/a n/a Is system programmed for fail- safe shutdown?* ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑ Yes ❑ No ®NA ❑ Yes ❑ No ® NA Was fail-safe verified to be operational? ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Wait time between applying pressure/vacuum/water and starting test 30 minutes 30 minutes 30 minutes 30 minutes Test Start Time: 12:20pm 12:20pm 12:20pm 12:50pm Initial Reading (Rj): 3.0000 3.4313 0.0780 0.70000 Test End Time: 12:35pm 12:35pm 12:35pm 1:05pm Final Reading (RF): 3.9000 3.4317 0.0778 1.0250 Test Duration: 15 min 15 min 15 min 15 min Change in Reading (RF-Ri): -0.85223 0.00035 0.00026 0.32907 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: ❑ Pass ® Fail ® Pass ❑ Fail Z Pass'; ❑ Fail ❑ Pass ®Fail Was sensor removed for testing? ®Yes [-]No ❑ NA ®Yes ❑No ❑NA ®Yes ❑No ❑ NA ®Yes ❑No ❑ NA Was sensor properly replaced and verified functional after testing? ®yes [:]No ❑ NA ®Yes [:]No ❑NA ®Yes ❑No ❑ NA ®Yes❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the UDC is not tested, specify how much was tested. If the answer to M of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)