COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

L-A Page 7 of 9 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Other (Specify) ® Industry Standard ❑ Professional Engineer Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ Vacuum ® Hydrostatic Test Equipment Used: See attached testing procedures Fill Sump # 87-1 Fill Sump # 87-2 Equipment Resolution: Fill Sump # 91 Fill Sump # Sump Diameter: 48" 48" 48" Sump Depth: 59" 58" 55" Height from Tank Top to Top of Highest Piping Penetration: 18" 18" 18" Height from Tank Top to Lowest Electrical Penetration: 24" 24" 20" Condition of sump prior to testing: Fair Fair Fair Portion of Sump Tested Above highest penetration Above highest penetration Above highest penetration Above highest penetration Sump Material & Manufacturer: Fiberglass Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and starting test: 30 minutes 30 minutes 30 minutes 30 minutes Test Start Time: 10:03am 9:57am 9:57am Initial Reading (Ri): 0.6249 5.0946 0.1189 Test End Time: 10:18am 10:12am 10:12am Final Reading (RF): 0.6246 5.0949 0.1187 Test Duration: 15 min 15 min 15 min 15 min Change in Reading (RF -RI): 0.00030 0.00028 0.00016 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: Z Pass El Fail Z Pass ®`Fail ® Pass ❑ Fail O'Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ® Yes ❑ No ® Yes ❑ No ® Yes ❑ No Does the sensor alarm when either product or water is detected? ®Yes ❑ No ❑NA ®Yes [-]No ❑NA ®Yes ❑ No [:]NA ❑Yes ❑ No ®NA Was sensor removed for testing? ®Yes [-]No ❑NA ®Yes ❑ No ❑NA ®Yes [-]No ❑NA ®Yes [-]No ❑NA Was sensor properly replaced and verified functional after testing? ®Yes ❑ No RNA ®Yes ❑ No ❑NA ®Yes ❑ No ❑NA ®Yes ❑ No [INA Comments - (include information on repairs made prior to testing, and recommended follow-up for failed tests)