Laserfiche WebLink
E <br />Monitoring System Certification <br />Complete the following checklist: <br />* In Section E below, describe how and went ese deficiencies were or will be corrected. <br />E. s® <br />Page 2 of 3 03/01 <br />Is the audible alarm operational? <br />EM�LNR <br />Nj <br />Is the visual alarm operational? <br />A <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />E3 <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment -will <br />not interfere with their proper operation? <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) operationa <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) El Sump/Trench Sensors; 21 Dispenser Containment Sensors. <br />Did you confirm positive shut -down due to leaks and sensor failure/disconnection? IR Yes; Ll No. <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br />mechanical overfill %revention valve is installed is the overfill <br />point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? 95% <br />Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced <br />and list the manufacturer name and model for all replacement parts in Section E, below. <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all 1hal apply) LJ <br />Product-, LJ Water. If yes, describe causes in Section E, below. <br />Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable <br />Is all monitoring equipment operational per manufacturer's specifications? <br />* In Section E below, describe how and went ese deficiencies were or will be corrected. <br />E. s® <br />Page 2 of 3 03/01 <br />