Laserfiche WebLink
' 6e_ <br /> swRCB,January 2002 JUL 2016 <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ a <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑Sump ManufacturerX❑Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑Vacuum Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 <br /> UE0460002 <br /> Sump Diameter: 44" <br /> Sump Depth: 60" <br /> Height from Tank Top to Top of 32„ <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 31" <br /> Electrical Penetration: <br /> Condition of sump prior to Good <br /> testing: <br /> Portion of Sump Tested 2"above high collar <br /> Sump Material: Fiberglass <br /> Wait time between applying <br /> pressure/vacuum/water and 15 min. <br /> starting test: <br /> Test Start Time: 10:31 am 10:47 am <br /> Initial Reading(Rj): 3.4752 3.4756 <br /> Test End Time: 10:46 am 11:02 am <br /> Final Reading(RF): 3.4756 3.4756 <br /> Test Duration: 15 min. 15 min. <br /> Change in Reading(RF-Ri): .0004 1.0000 <br /> Pass/Fail Threshold or Criteria: .002 1.002 <br /> Test Result: ❑X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail <br /> Is there a sensor in the sump? ❑X Yes ❑No ❑Yes ❑No ❑Yes ❑No ❑Yes ❑No <br /> Does the sensor alarm when ❑Yes [KNo ❑NA <br /> either product or water is ❑Yes❑No❑NA ❑Yes❑No NA Yes <br /> ❑ ❑ ❑No❑NA <br /> detected? <br /> Was sensor removed for testing? ❑X Yes ❑No DNA ❑Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA <br /> Was sensor properly replaced and ❑Yes ❑X No DNA <br /> verified functional after testing? ❑Yes[—]No DNA ❑Yes❑No❑NA ❑Yes❑No❑NA <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> The sensor was reinstalled to the lowest point, but not tested. <br />