COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

• e-LL_ SWRCB,January 2002 6. PIPING SUMP TESTING JUL 2 0 2016 Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑Profession4 ❑Other(Specify) .��..._.. .- Test Method Used: ❑Pressure ❑Vacuum 0 Hydrostatic ❑Other(Specify) Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 U E046 U 002 Sump Diameter: 44" _......----...------- -Sump Depth: 56" Sump Material: Fiberglass Height from Tank Top to Top of 20" Highest Piping Penetration: Height from Tank Top to Lowest 15" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested' 2"above high pen. Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ONA Dyes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA product and water)?" Turbine shutdown response time NA Is system programmed for fail-safe ❑Yes [—]No [ENA ❑ shutdown?` ❑ ❑ ❑ ❑ ❑ Yes❑No NA Yes❑No NA Yes No❑NA Was fail-safe verified to be E]Yes ❑No ®NA operational?` ❑Yes❑No❑NA ❑Yes❑No ❑NA ❑Yes❑No❑NA Wait time between applying pressure/vacuum/water and starting 15 min. test: Test Start Time: 10:31 am 10:47 am Initial Reading(Rj): 2.6053 2.6055 Test End Time: 10:46 am 11:02 am Final Reading(RF): 2.6054 2.6054 Test Duration: 15 min. 15 min. Change in Reading(RF-RI): .0001 .0001 Pass/Fail Threshold or Criteria: .002 .002 Test Result: El Pass ❑Fail ❑ Pass ❑Fail ❑Pass ❑Fail ❑Pass E]Fail Was sensor removed for testing? [E]Yes ❑No [_]NA ❑Yes❑No❑NA ❑Yes❑No [_]NA [—]Yes❑No❑NA Was sensor properly replaced and [—]Yes ❑X No [_]NA verified functional after testing? ❑Yes❑No®NA ❑Yes❑No ❑NA ❑Yes❑No❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) The sensor was reinstalled to the lowest point, but not tested. ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)