COMPLIANCE INFO_2014-2017 - Laserfiche WebLink

Home Browse Search

&rria-RYAN IHc. R Job# 20.640950.1 SWRCB,January 2002 Page 2 of 4 6.PIPING SUMP TESTING Test Method Developed By: Tank Manufacturer Industry Standard Professional Engineer Other(s eci ) Test Method Used: Pressure Vacuum Hydrostatic Other(specify) Test E ui ment Used: Incon E ui ment Resolution: 0.0001 Al Sum # 87-! Sum # Sum # Sum # Sump Diameter: 44" Sump Depth: - 50" Sump Material: !^ Fiberglass Height from Tank Top to Top of 301, Highest Piping Penetration: Height from Tank Top to Lowest 12" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested(1) 2"above piping. Does turbine shut down when sump sensor detects liquid(both Yes No NA°' Yes No NA Yes No NA Yes No NA product and water)?* Turbine shutdown res onse time N/A Is system programmed for fail-safe Yes No WI AI Yes No NA Yes No NA Yes No NA shutdown?* Was fail-safe verified to be Yes No NAs Yes No NA Yes No NA Yes No NA o erational?* Wait time between applying pressure/vacuum/water and starting 10 min test: Test Stasi Time: 9:47 Initial Reading(Ri): 5.3289 Test End Time: 10:02 Final Reading(Rf) 5.328 Test duration: 15 inin Change in Reading(Rf-Ri): -0.0009 Pass/Fail Threshold or Criteria: 0.002 Test Results: x Pass Fail Pass Fail Pass Fail Pass Fail Was sensor removed for testing? Yes No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and yes No NA3 Yes No NA Yes No NA Yes No NA verified functional after testing? Comments-(include information on repairs made prior to testing,and recommend follow-up for failed tests) (1)If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)