Laserfiche WebLink
1 � <br /> RE%ELVE <br /> 6erraE,7-Brea INC. -640950.1 <br /> SWRCB.January 2002 DEC 201 Page 2 of 4 <br /> 6.PIPING SUMP TESTBMVIRONMENTAL HEALTH <br /> Test Method Developed By: Tank Manufacturer Industry StaHWARTMRWssional Engineer <br /> Other(s eel ) <br /> Test Method Used: Pressure Vacuum Hydrostatic <br /> Other(specify) <br /> Test E ui ment Used: I neon Equipment Resolution: 0.0001 <br /> 'Sup# 87-1 Sump# Sump# Sump# <br /> Sump Diameter: 44" <br /> Sump Depth: 50" <br /> Sump Material: Fiberglass <br /> Height from Tank Top to Top of 30" <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 121, <br /> Electrical Penetration: <br /> Condition of sumE Erior to testing: Good <br /> Portion of Sump Tested(1) 2"above piping <br /> Does turbine shut down when <br /> sump sensor detects liquid(both Yes No NA Yes No NA Yes No NA Yes No NA <br /> product and water)?* <br /> Turbine shutdown response time N/A <br /> Is system programmed for fail-safe Yes No NA Yes No NA Yes No NA Yes No NA <br /> shutdown?* <br /> Was fail-safe verified to be Yes No NA Yes No NA Yes No NA Yes No NA <br /> o erational?* <br /> Wait time between applying <br /> pressure/vacuum/water and starting 10 min <br /> test: <br /> Test Start Time: 9:47 <br /> Initial Reading(Ri): 5.3289 <br /> Test End Time: 10:02 <br /> Final Reading(Rf) 5.328 <br /> Test duration: 15 min <br /> Chane in Reading(Rf-Ri): -0.0009 <br /> Pass/Fail Threshold or Criteria: 0.002 <br /> Test Results: x Pass Fail Pass Fail Pass Fail Pass Fail <br /> Was sensor removed for testing? Yes No NA Yes No NA Yes No NA Yes No NA <br /> Was sensor properly replaced and Yes No NA Yes No NA Yes No NA Yes No NA <br /> verified functional after testing? <br /> Comments-(include information on repairs made prior to testing,and recommend follow-up for failed tests) <br /> (1)If the entire depth of the sump is not tested,specify how much was tested.If the answer to My of the questions indicated with an <br /> asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160) <br />