Laserfiche WebLink
16. Tanks subject to floatation. (Section 2635 (a) (7)l <br />® A. Anchored or stab. <br />8. Anchors to be installed as specified by manufacturer. <br />® C. Installation details provided on plans. <br />D. Calculations provided. <br />17. SPILL AND OVERFILL PREVENTION <br />Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br />containers)/piping sump(s) required, including tank fill and all openings). <br />A. Spill container (Section 2635 (b) (1)l. <br />If made of metal, exterior watt protected from galvanic corrosion. <br />Capacity: (minimum of five gallons) <br />Equipped with a drain valve which allows drainage of spilt into primary container. <br />Manufacturer: <br />B. Overfill prevention system does not allow for manual er a and meets one of the following requirements: <br />(1) Alert transfer operator at 90% full by r t i in the flow into the tank or triggering an audible <br />and visual alarm (Section 2635(b)(2)(A)l . <br />Manufacturer: Mode <br />(2) Restrict delivery flow he nk 0 minutes ore overfill when tank is filled at no more than <br />95% capacity and active an ible alarm at least five minutes before overfill [Section 2635 <br />(b) (2) (8)l. <br />Manufacturer: Model: <br />(3) Provide positive sh t off at no more than 95% capacity (Section 2635 (b) (2) (C)I. <br />Manufacturer: Model: <br />(4) P ov positive shut-off of flow to the tank so that the fittings on top of the tank are not <br />ex sed to the product overfilling [Section 2635 (b) (2) (D)l. <br />anufacturer: Model: <br />18. PIPING INFORMATION <br />PIPING INFORMATION TANK# TANK# TANK# TANK# <br />DISTANCE from <br />DISPENSER to TANK <br />MANUFACTURER <br />SYSTEM TYPE <br />CONSTRUCTION <br />MATERIAL '®'* <br />LEAK DETECTION SYSTEM <br />100% METHANOL COMPATIBILITY YES NO <br />CORROSION PROTECTION YES No <br />* System Type; suction, pressure, and gravity <br />Construction: single -waited, doubte-wetted, tired -trench, etc. <br />"* Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br />