Laserfiche WebLink
Apr 08 04 09:57a ALI&NZICKER 1 2V&537 1573 p.3 <br />FINAL MECHANICAL INSTALLATION 7 <br />installing the TSP-ULS. To install the TSP-ULS sensor in a sump, refer to Figure 5-1 and <br />Sensor — Sump Installation Figure 7-1. Place a 1/8 of an inch spacer (such as a ruler) under <br />the sensor's base and pull the sensor cable through the <br />compression gland fitting at the weather proof junction box until the <br />sensor rises above the spacer. <br />Next, pull down on the sensor until the base rests on the spacer. <br />Finally, while the cable is taut, tighten the compression gland fitting <br />and remove the spacer. <br />Figure 7-1. TSP-ULS Sensor -Typical Sump Installation <br />Page 10 TSP-ULS Installaflon Ins coons <br />