Laserfiche WebLink
Apr 1 20 04 09:25a RL UNZICKER <br />In <br />M <br />K <br />1 2 <br />16 537 1573 p.7 <br />Installation Sequence Perform the installation in the following sequence: <br />1) Riser Pipe* and/or Manhole - Mechanical installation. <br />2) Conduit, EYS fitting(s), and Weatherproof Junction Box - <br />Mechanical installation. <br />9) Record the location where the sensor was installed, and store <br />this Installation manual along with other Tank SentinelO <br />documentation for future reference. <br />10) Program (Setup mode) the sensors - Reference the User's <br />Guide. <br />TSP-ULS Installation Instructions Page 3 <br />3) <br />Sensor wiring at the TS -1000 console -Electrical installation. <br />NOTE <br />(Below) <br />4) <br />Splice sensor cable and console wiring at the Junction Box with <br />splice connectors (after pulling the sensor cables through the <br />BEFORE YOU START - Read, <br />TSP -K12 Riser Cap cord grip fitting* and/or Weatherproof <br />understand, and reference <br />Junction Box cord grip fitting) - Electrical installation. <br />the TS -1000 Installation <br />Guide (INCON PN 000-1025). <br />5) <br />Test sensor. If okay, seal crimp splice connectors with optional <br />Pay particular attention to the <br />epoxy Seal Paks. <br />installation sequence, and <br />options, Do's and Don1s, and <br />6) <br />Install tested sensor in the sump r or interstitial area of the steel <br />Safety Issues. Heed all <br />tank, install the Riser Cap), and tighten all cord grip fitting(s) - <br />CAUTIONS and WARNINGS. <br />Final Mechanical Installation. <br />Lastly, the Service and <br />WARRANTY statement at the <br />7) <br />Reinstall all safety covers and guards, secure all enclosure <br />end of the Installation Guide <br />covers, and secure and seal all fitting threads - Final <br />applies to all Tank SentinelP <br />Mechanical Installation. <br />accessories, and sensors. <br />8) <br />Install the Manhole cover(s) - Final Mechanical Installation. <br />9) Record the location where the sensor was installed, and store <br />this Installation manual along with other Tank SentinelO <br />documentation for future reference. <br />10) Program (Setup mode) the sensors - Reference the User's <br />Guide. <br />TSP-ULS Installation Instructions Page 3 <br />