COMPLIANCE INFO_2011-2013 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of :Z4113 0 a 11A 19 1 D1 KI U 10JI N Dk Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard ❑ Professional Engineer X Other (Specify)SWRCB Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Specify) Test Equipment Used: iNCON TS -STS Equipment Resolution: UDC # 16 UDC # UDC # UDC # UDC Manufacturer: UDC Material: FRP UDC Depth: 30" Height from UDC Bottom to Top of Highest Piping Penetration: 11" Height from UDC Bottom to Lowest Electrical Penetration: N/A Condition of UDC prior to testing: Fair Portion of UDC Tested 2" above hightest penetration Does turbine shut down when UDC sensor detects liquid (both product and water)?' XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time Is system programmed for fail- safe shutdown?* XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was fail-safe verified to be operational?* ❑ Yes ❑ No XNA ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test 30 Min Test Start Time: 12:22/12:45 Initial Reading (Rj): 6.0742/6.0741 Test End Time: 12:37/13:00 Final Reading (RF): 6.0739/6.0747 Test Duration: 15 min Change in Reading (RF-Ri): -0.0003/+0.0006 Pass/Fail Threshold or Criteria: +/- 0.002 Test Result: X Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? XYes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes 1-3No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Test boots installed Removed after testing. ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)