COMPLIANCE INFO_2011-2013 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of S. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer X Other (Spec�)SWRBC Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Spec) Test Equipment Used: INCON TS -STS Equipment Resolution: Sump # T-5 91 Sump # Sump # ,.rwn Sump # Sump Diameter: 42" Sump Depth: 83" Sump Material: FRP Height from Tank Top to Top of 14" Highest Piping Penetration: Height from Tank Top to Lowest 4819 Electrical Penetration: Condition of sump prior to testing: Fair Portion of Sump Tested' 2" above highest penetration Does turbine shut down when sump sensor detects liquid (both X Yes ❑ No NA product and water)?" ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time N/A Is system programmed for fail-safe X Yes ❑ No ❑ shutdown?* NA ❑ yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes 0 No ❑ NA Was fail-safe verified to be X Yes ❑ No ❑ operational?" NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting 30 minutes test: Test Start Time: 1:07/1:28 Initial Reading (Rj): 7.8119/7.8116 Test End Time: 1:2211:43 Final Reading (RF): 7.8110/7.8108 Test Duration: 15 min Change in Reading (RF -R,): -0.0009/-0.0008 Pass/Fail Threshold or Criteria: +/-0.002 Test Result: X Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and XYes ❑ No ❑ NA verified functional after testing? ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Test boot installed Removed after testinv ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk(*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)