COMPLIANCE INFO_2011-2013 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of UDC Manufacturer: XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA UDC Material: FRP UDC Depth: 30" ❑ Yes []No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Height from UDC Bottom to Top of Highest Piping Penetration: 11" ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Height from UDC Bottom to Lowest Electrical Penetration: N/A Condition of UDC prior to Fair Portion of UDC Tested' 11 2" above hightest Does turbine shut down when UDC sensor detects liquid (both product and water)?` XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time Is system programmed for fail- safe shutdown'? XYes ❑ No ❑ NA ❑ Yes []No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was fail-safe verified to be operational?* ❑ Yes ❑ No XNA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test 30 Min Test Start Time: 12:22/12:45 Initial Reading (RI): 6.0742/6.0741 Test End Time: 12:37/13:00 Final Reading (RF): 6.0739/6.0747 Test Duration: 15 min Change in Reading (RF -RI): -0.0003/+0.0006 Pass/Fail Threshold or Criteria: +/-0.002 Test Result: X Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? XYes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments - (include information on repairs made prior to testing, and recommended follow-up for failed tests) Test boots installed Removed after testim4. ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)