Laserfiche WebLink
San Joaquin County DIRECTOR <br /> PQ i N Donna Heran, REHS <br /> Environmental Health Department <br /> ASSISTANT DIRECTOR <br /> 600 East Main Street Laurie Cotulla,REHS <br /> X Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> • Mike Huggins,REHS,RDI <br /> Margaret Lagorio,REHS <br /> C4�%POR ;P Website: www.sjgov.org/ehd RobertMcClellon, REHS <br /> Phone: (209)468-3420 Jeff Carruesco,REHS,RDI <br /> Fax: (209)464-0138 Kasey Foley,REHS <br /> June 11, 2009 <br /> Dulcinea Webb <br /> Walton Engineering, Inc. <br /> P.O Box 1025 <br /> West Sacramento CA 95691 <br /> Fax (916) 373-1173 <br /> RE: New West#1003 6437 W. Banner Rd. Lodi CA 95242 (SR0057513) <br /> The San Joaquin County Environmental Health Department(EHD)has completed the <br /> review of the application for permit to install a new OPW direct bury spill container on <br /> the fill riser of the diesel tank at the above noted address. The diesel VMI 99-LD2000 <br /> MLLD and Keyboard Group LED 0329328-002 have already been installed during the <br /> monitoring system certification of 6-8-09. The permit has been approved with the <br /> following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board(may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s) of the <br /> component(s)being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 3. Permit expires 180 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> 4. All components must be certified by an independent testing organization and <br /> labeled as required by the organization. (UL, ULC,ANSI, API, ASTM, etc. See <br /> California Code of Regulations(CCR), Title 23 Chapter 16 Table B for complete <br />