Laserfiche WebLink
CPT Controller Manual <br /> Step 3: Cut the wires leaving about 6 inches hanging out of the <br /> capacitor compartment. <br /> w <br /> Ju. <br /> ry <br /> r <br /> < ri� <br /> FIGURE 3.8 CUTTING THE WIRES <br /> Step 4: Using wire-nut connectors, attach the wires as follows: <br /> 0 yellow wire to yellow wire, <br /> 0 red wire to red wire, and <br /> 0 black wire to black wire. I <br /> Step 5: Coil the excess wire into the capacitor compartment. <br /> Replace the capacitor cover using litharge grease, and torque to <br /> 35 ft-lb (50 N-m). <br /> Step 6: Install the eyebolt plug using litharge grease, and torque to <br /> 50 ft-lb (70 N-m). <br /> Chapter 3:Installation 3-12 ARE260-240 Rev.A ♦ 6/97 <br />