Laserfiche WebLink
ATEX Directive 94/9/EC approved PLLD systems are marked with the following information defining their limits for <br /> safe use: <br /> 1. Location Classification <br /> • EEx is IIA T3 <br /> 2. Device Limiting Parameters <br /> • Ui = 14.OVdc <br /> • Ii =202 mA <br /> • Pi =0.667 W <br /> • Ci =2.24µF <br /> • Li =0.0 mH <br /> 3. ATEX Certification Number <br /> • DEMKO 02 ATEX 0205387 <br /> 4. Refer to the site preparation procedures in this manual for general instructions on safe installation,use,and <br /> replacement. <br /> 5. The PLLD system does not require periodic maintenance or calibration. <br /> 6. The PLLD system is not serviceable.If a failure occurs, the unit should be replaced in accordance with the <br /> requirement of this manual. <br /> A-1 <br />