COMPLIANCE INFO_2014-2017 - Laserfiche WebLink

Home Browse Search

8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Inches MEEEMEEMEMEEEM SEEMENEM Fill Sump#87 Fill Sump#91 Fill Sump# Fill Sump# Sump Diameter: 48^ 48° Sump Depth: 79^ 83" Height from Tank Top to Top of 10• 101, Highest Piping Penetration: Height from Tank Top to Lowest 27" 31" Electrical Penetration: Condition of sump prior to Fair Fair Fair Fair testing: Portion Of Sump Tested Above highest penetration Above highest penetration Above highest penetration Above highest penetration Sump Material: Wait time between applying pressure/vacuum/water and 15 minutes 15 minutes 15 minutes 15 minutes starting test: Test Start Time: 9:56am 9:48am Initial Reading(RI): 2.76101 Inches 3.50518 Inches Inches Inches Test End Time: 10:11am 10:03am Final Reading(RF): 2.76193 Inches 3.50551 Inches Inches Inches Test Duration: 15 minutes 15 minutes 15 minutes 15 minutes Change in Reading(RF-R,): 0.00092 0.00033 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: pPass ❑Fail p Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sump? m Yes ❑No 0 Yes ❑No m Yes ❑No ®Yes ❑No Does the sensor alarm when either product or water is 0 Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Z Yes ❑No ❑NA detected? Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA m Yes ❑No ❑NA Was sensor properly replaced and ©lyes ❑No ❑NA p Yes ❑No ❑NA p Yes ❑No ❑NA p Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests)