COMPLIANCE INFO_2013-2016 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer CK Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum Xj Hydrostatic ❑Other(Spec) oTestquipment Used: Incon Incon TS-STS Tester Equipment Resolution: +/-0.002" # 87 T#3 Sump# 91 STP Sump# Sump# Diameter: 142" 42" Sump Depth: 61" 61" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 17" 5" -Highest Piping Penetration: Height from Tank Top to Lowest 16" 14" Electrical Penetration: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 23" 20" Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ®NA ❑Yes ❑No 9 NA ❑Yes ❑No 9 NA ❑Yes ❑No 9,NA -product and water)?* Turbine shutdown response time Is system programmed for fail-safe ❑Yes []No k NA ❑Yes ❑No 9 NA ❑Yes ❑No 9 NA ❑Yes ❑No X NA shutdown?" Was fail-safe verified to be ❑Yes ❑No k NA ❑Yes ❑No ®NA ❑Yes ❑No K,NA [ Yes ❑No 9 NA -operational?* Wait time between applying pressure/vacuum/water and starting 15 Minutes 15 Minutes test: Test Start Time: 9:07am 9:24am 9:07am 9:24am Initial Reading(RI): 3.6998" 3.6991" 3.4910" 3.4911" Test End Time: 9:22am 9:39am 9:22am 9:39am Final Reading(RF): 3.6991" 3.6983" 3.4908" 3.4913" Test Duration: 15 Minutes Each (30) 15 Minutes Each (30 Change in Reading(RF-R,): -0.0007 -0.0008 -0.0002 0.0002 Pass/Fail Threshold or Criteria: +/-0.002" 1 +/-0.002" +/-0.002" 1 +/-0.002" 'Test Result:s ® Pass ❑Fail 19 Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? k Yes []No [INA ®Yes ❑No ❑NA ❑Yes ❑No K NA ❑Yes Li No 9 NA Was sensor properly replaced and k Yes ❑No ❑NA ❑x Yes ❑No ❑NA ❑Yes ❑No 91 NA ❑Yes ❑No ©NA verified functional after testing? Comments—(include information on repairs made prior to testing and recommended follow-up for failed tests) SEP 0 8 2014 ENVIRONMENTAL L 1 DEPARTMENT ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)