Laserfiche WebLink
File MH29667 Page T1-2 of 2 Issued: 2005-09-08 <br />(FIBERGLASSSIMULATED USE RESISTANCE TO FLUIDS TEST REINFORCED PLASTIC SUM?' <br />One sample assembly as described in Item B was placed in a container <br />filled with eachof - fluids♦ below <br />containerimpletely covered with the fluids.i i <br />were maintained at a temperature of 100'F throughout the exposure. Following <br />30 days in this condition, the containers were subjected to an internal <br />pressure of 4.5 psig (based on a maximum sump depth of 10.3 ft.) for a period <br />of at least 5 min. while the samples were examined for evidence of leakage, <br />i!'. Methanol <br />0" Methanol/50% ASTM Refer <br />15% Ethanol/85% ASTM Reference Fuel <br />Ethanol/90t <br />filled15% MTBE/85t ASTM Reference Fuel C I <br />SIMULATED USE RESISTANCE TO FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC SUMt <br />one sample assembly as described in Item C was placed in a container <br />with each of 'i:.. below ..t the fittings inside <br />container were completely covered with the fluids. The samples and fluids <br />were maintained at a temperature of 1000F throughout the exposure. Following <br />1 days in this condition,the containers <br />pressure of 4.5 psig (based on a maximum sump depth of 10.3 ft.) for a period <br />of at least 5 min. while the samples were examined for evidence of leakage. <br />% Methanol <br />50% Methanol/50% ASTM Reference Fuel C <br />!!': Ethanol <br />50W Ethanol/50* <br />Ethanol/85W <br />i' Ethanol/90t <br />15% MTBE/85% ASTM Reference Fuel C <br />Diversified Products Manufacturing Inc. Approvals for Tech Manual Rev 2 Page 10 of 13 <br />