WORK PLANS - Laserfiche WebLink

Home Browse Search

ACCESSIBILITY/CBC Notes ACCESSIBILITY/CBC Notes (Continued) ACCESSIBILITY/CBC Notes (Continued) ACCESSIBILITY/CBC Notes (Continued) A. APPLICATION AND ADMINISTRATION C. ACCESSIBLE ROUTES 38. Thresholds, if provided at doorways, shall be 1/2 inch high maximum. Raised thresholds and changes in 18. Grab bars shall comply with Section 11 B-609 Grab Bars. A side-wall grab bar complying with Section AA, level at doorways shall comply with 11 B-302 Floor or Ground Surfaces and 11 B-303 Changes in Level. 11 B-604.5.1 Side Wall shall be provided and shall be located on the wall closest to the water closet. In 1. When alterations or additions are made to existing buildings or facilities, an accessible path of travel to the GENERAL §11 B-404.2.4.5. addition, a rear-wall grab bar complying with Section 11 B-604.5.2 Rear Wall shall be provided. Where specific area of alteration or addition shall be provided unless otherwise exempt. §11 B-202.4 39. Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 11 B-309.4 separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar 2. Primary accessible path of travel shall include a primary entrance to the building or facility;toilet and bathing 1. At least one accessible route shall be provided within the site from accessible parking spaces and accessible Operation. Operable parts of such hardware shall be 34 inches minimum and 44 inches maximum above the meeting the dimensional requirements of Sections 11 B-604.5.1 Side Wall and 11 B-604.5.2 Rear Wall shall W facilities serving the area;drinking fountains serving the area; public telephones serving the area, and signs. passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible finish floor or ground. Where sliding doors are in the fully open position, operating hardware shall be exposed be permitted. §11 B-202.4 building or facility entrance they serve. Where more than one route is provided, all routes must be accessible. and usable from both sides. §11 B-404.2.7 19. Ambulatory accessible compartments shall have a depth of 35 inches minimum and 37 inches maximum. 3. When the adjusted construction cost is less than or equal to the current valuation threshold ($170,466.00), §11 B-206.2.1 (See exceptions) 40. The force for pushing or pulling open a door or gate other than fire doors shall be as follows: 20. Water closets and toilet compartments for children's use shall comply with Section 11 B-604.9 Water Closets the cost of compliance with the primary accessible path of travel requirements is limited to 20 percent of the 2. At least one accessible route shall connect accessible buildings, accessible facilities, accessible elements, a. Interior hinged doors and gates: 5 pounds maximum. and Toilet Compartments for Children's Use and follow suggested dimensions on Table 11 B-604.9. adjusted construction cost of alterations, structural repairs or additions presently planned and those during and accessible spaces that are on the same site. §11 B-206.2.2 (See exceptions) b. Sliding or folding doors: 5 pounds maximum. 21. Urinals shall be the stall-type or the wall-hung type with the rim 17 inches maximum above the finish floor or the preceding three-year period. §11 B-202.4 3. At least one accessible route shall connect each story and mezzanine in multi-story buildings and facilities. c. Required fire doors:the minimum opening force allowable by the appropriate administrative authority, ground. Urinals shall be 13 inches deep minimum measured from the outer face of the urinal rim to the back 4. Adjusted construction cost of alterations, structural repairs or additions does not include the cost of §11 B-206.2.3(See exceptions) not to exceed 15 pounds. of the fixture. alterations to path of travel elements. §11 B-202.4 4. In new construction of buildings where elevators are required by 11 B-206.2.3 Multi-Story Buildings and d. Exterior hinged doors: 5 pounds maximum. 22. A clear floor space or ground space complying with Section 11 B-305 Clear Floor or Ground Space positioned ©2020 STARBUCKS COFFEE COMPANY 5. In choosing which accessible elements to provide, priority should be given to those elements that will Facilities, and which exceed 10,000 square feet on any floor, an accessible means of vertical access via ramp, 41. Swinging door and gate surfaces within 10 inches of the finish floor or ground measured vertically shall have for forward approach shall be provided. provide the greatest access in the following order: (1) an accessible entrance; (2) an accessible route to the elevator or lift shall be provided within 200 feet of travel of each stair and each escalator. §11 B-206.2.3.2 a smooth surface on the push side extending the full width of the door or gate. Parts creating horizontal or 23. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with Section altered area; (3) at least one accessible restroom for each sex;(4) accessible telephones; (5) accessible 5. In existing buildings that exceed 10,000 square feet on any floor and in which elevators are required by vertical joints in these surfaces shall be within 1/16 inch of the same plane as the other and be free of sharp 11 B-309 Operable Parts except that the flush control shall be mounted at a maximum height of 44 inches STARBUCKS" drinking fountains; and (6)when possible, additional accessible elements such as parking, storage and 11 B-206.2.3 Multi-Story Buildings and Facilities, whenever a newly constructed means of vertical access is or abrasive edges. Cavities created by added kick plates shall be capped. §11B-404.2.10 above the finish floor. 2401 UTAH AVENUE SOUTH alarms. §11 B-202.4 provided via stairs or an escalator, an accessible means of vertical access via ramp, elevator or lift shall be 24. Lavatories and sinks shall comply with Section 11 B-606 Lavatories and Sinks. 6. Alterations to a qualified historic building or facility shall comply with Chapter 11 B unless it will threaten or provided within 200 feet of travel of each new stair or escalator. §11 B-206.2.3.2 25. For lavatories and sinks, a clear floor space complying with Section 11 B-305 Clear Floor or Ground SEATTLE, WASHINGTON 98134 destroy the historical significance or character-defining features of the building or property. In those cases, 6. At least one accessible route shall connect accessible building or facility entrances with all accessible spaces E. PLUMBING FIXTURES AND FACILITIES Surfaces, positioned for a forward approach, and knee and toe clearance complying with Section 11 B-306 (206) 318-1575 alternative provisions shall be applied on an item-by-item or case-by-case basis with sufficient written and elements within the building or facility, including mezzanines, which are otherwise connected by a Knee and Toe Clearance shall be provided. documentation. §1113-202.5, SHBC 8-602 circulation path. §11B-206.2.4(See exceptions 1 through 7) TOILET AND BATHING ROOM CLEARANCES 26. Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches THESE DRAWINGS AND THE PROJECT MANUAL 7. Public accommodations shall maintain in operable working condition those features of facilities and 7. Accessible routes shall coincide with or be located in the same area as general circulation paths. Where maximum above the finish floor or ground. ARE CONFIDENTIAL AND SHALL REMAIN THE equipment that are required to be accessible to and useable by persons with disabilities. Isolated or circulation paths are interior, required accessible routes shall also be interior;An accessible route shall not 1. Where toilet facilities and bathing facilities are provided, they shall comply with 11 B-213 Toilet Facilities and SOLE PROPERTY OF STARBUCKS temporary interruptions in service or accessibility due to maintenance or repairs shall be permitted. pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except Bathing Facilities. Where toilet facilities and bathing facilities are provided in facilities permitted by CORPORATION, WHICH IS THE OWNER OF THE §11 B- 108 as permitted by Chapter 10. §11 B-206.3 11 B-206.2.3 Multi-Story Buildings and Facilities Exceptions 1 and 2 not to connect stories by an accessible SIGNS RELATED TO TOILETS AND BATHING FACILITIES COPYRIGHT IN THIS WORK. THEY SHALL NOT route,toilet facilities and bathing facilities shall be provided on a story connected by an accessible route to an BE REPRODUCED (IN WHOLE OR IN PART), B. BUILDING BLOCK EMPLOYEE WORKSTATIONS accessible entrance. §11B-213.1 27. Entrances leading to toilet rooms and bathing rooms complying with 11 B-603 Toilet and Bathing Rooms shall SHARED WITH THIRD PARTIES OR USED IN ANY 2. Where separate toilet facilities are provided for the exclusive use of separate user groups, the toilet facilities be identified by a geometric symbol complying with 11 B-703.7.2.6 Toilet and Bathing Room Geometric MANNER ON OTHER PROJECTS OR FLOOR OR GROUND SURFACES 8. Employee workstations shall be on an accessible route complying with Division 4. Spaces and elements within serving each user group shall comply with 11 B-213 Toilet Facilities and Bathing Facilities. §11 B-213.1.1 Symbols. Where existing toilet rooms or bathing rooms do not comply with 11 B-603 Toilet and Bathing EXTENSIONS TO THIS PROJECT WITHOUT THE employee workstations shall only be required to comply with Sections 11 B-207.1, 11 B-215.3, 11 B-302, 3. Where toilet rooms are provided, each toilet room shall comply with 11 B-603 Toilet and Bathing Rooms. Rooms, directional signs indicating the location of the nearest compliant toilet room or bathing room within PRIOR WRITTEN CONSENT OF STARBUCKS 1. Floor and ground surfaces shall be stable, firm, and slip resistant. §11 B-302.1 11 B-303, and 11 B-404.2.3. Common use circulation paths within employee workstations shall comply with Where bathing rooms are provided, each bathing room shall comply with 11 B-603 Toilet and Bathing Rooms. the facility shall be provided. Signs shall comply with 11 B-703.5 Visual Characters and shall include the CORPORATION. THESE DRAWINGS AND 2. Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion Section 11 B-206.2.8. §11 B-203.9 §11 B-213.2 (See exception) International Symbol of Accessibility complying with 11 B-703.7.2.1 ISA. Where existing toilet rooms or SPECIFICATIONS ARE INTENDED TO EXPRESS 6 or pad. Carpet or carpet tile shall have a level loop, textured loop, level cut pile, or level cut/uncut pile 4. Unisex toilet rooms shall contain not more than one lavatory, and not more than two water closets without bathing rooms do not comply with 11 B-603 Toilet and Bathing Rooms, the toilet rooms or bathing rooms DESIGN INTENT FOR A PROTOTYPICAL texture. Pile height shall be 12 inch maximum. §11 B-302.2, Figure 11 B-302.2 DETECTABLE WARNINGS AND DETECTABLE DIRECTIONAL TEXTURE urinals or one water closet and one urinal. Unisex bathing rooms shall contain one shower or one shower and complying with 11 B-603 Toilet and Bathing Rooms shall be identified by the International Symbol of STARBUCKS STORE (WHICH IS SUBJECT TO 06 Accessibility complying with 11 B-703.2.1 ISA. Where clustered single user toilet rooms or bathing facilities CHANGE AT ANYTIME one bathtub, one lavatory, and one water closet. Doors to unisex toilet rooms and unisex bathing rooms shall ) AND DO NOT REFLECT CD CHANGES IN LEVEL 9. Curb ramps shall have detectable warnings that extend 36 inches in the direction of travel for the full width of have privacy latches. §11 B-213.2.1 are permitted to use exceptions to 11 B-213.2 Toilet and Bathing Rooms, toilet rooms or bathing facilities ACTUAL SITE CONDITIONS. NEITHER PARTY f the ramp run less than 2 inches maximum on each side, excluding any flared sides. §11 B-247.1.2.2, 5. Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with complying with 11 B-603 Toilet and Bathing Rooms shall be identified by the International Symbol of SHALL HAVE ANY OBLIGATION NOR LIABILITY TO } 3. Vertical changes in level for floor or ground surfaces may be 1/4 inch high maximum and without edge §11 B-705.1.2.2 11 B-213.2 Toilet and Bathing Rooms shall comply with 11 B-213.3 Plumbing Fixtures and Accessories. Accessibility complying with 11 B-703.7.2.1 ISA unless all toilet rooms and bathing facilities comply with THE OTHER (EXCEPT STATED ABOVE) UNTIL A 0 treatment. Changes in level greater than 1/4 inch and not exceeding U2 inch in height shall be beveled 10. On perpendicular curb ramps, detectable warnings shall be located so the edge nearest the curb is 6 to 8 6. Door shall not swing into the clear floors ace or clearance required for an fixture. Other than the door to the rooms ms o Toilet and Bathing Rooms. Existing buildings that have been remodeled to provide specific toilet WRITTEN AGREEMENT IS FULLY EXECUTED BY wwith a slope not steeper than 1:2. §11 B-303, Figures 11 B-303.2 & 11 B-303.3 inches from the line at the face of the curb marking the transition between the curb and the gutter, street or accessible water closet compartment, a door in any position, may encroach into the turning space by 12 rooms or bathing rooms for public use that comply with these buobby entrance shall have the location of BOTH PARTIES. 4. Changes in level greater than 12 inch in height shall be ramped and shall comply with the requirements of highway. §11 B-247.1.2.2, §11 B-705.1.2.2 inches maximum. §11 B-213.2.3 and the directions to these rooms posted in or near the building lobby entrance on a sign complying with � 11 B-405 Ramps or 11 B-406 Curb Ramps as applicable. 11 B-303 11. On parallel curb rams detectable warnings shall be laced on the turning space at the flush transition 11 B-703.5 Visual Characters, including the International Symbol of Accessibility complying with STARBUCKS TEMPLATE VERSION: 12020.10.23 Np p pp § p ramps, g p g p 7. At single user toilet or bathing rooms, doors shall be permitted to swing into the clear floor space or clearance 11 B-703.3.2.1 ISA. 11 B-216.8 0 5. Abrupt changes in level exceeding 4 inches in a vertical dimension between walks, sidewalks or other between street and sidewalk. Detectable warnings shall extend the full width of the turning space at the flush required for any fixture only if a 30 inch by 48 inch minimum clear floor space is provided within the room § r pedestrian ways and adjacent surfaces or features shall be identified by warning curbs at least 6 inches in transition between the street and the sidewalk less than 2 inches maximum on each side. §11 B-247.1.2.2, beyond the arc of the door swing. §11 B-213.2.3(See exception) 28. Pictograms shall comply with the following: N height above the walk or sidewalk surface or guards or handrails with a guide rail centered 2 inches §11 B-705.1.2.2, Figure 11 B-406.3.2 a. Pictograms shall have a field of 6 inches minimum. Characters and Braille shall not be located in the g Y 9 9 g 8. Mirrors located above the lavatories or countertops shall be installed within the bottom edge of the reflecting O minimum and 4 inches maximum above the surface of the walk or sidewalk. These requirements do not 12. Islands or cut-through medians 96 inches or longer in length in the direction of pedestrian travel shall have pictogram field. §11 B-703.6.1 architecture q 9 g 9 p surface 40 inches maximum above the finish floor or ground. Mirrors not located above the lavatories or � apply between a walk or sidewalk and an adjacent street or driveway. §11 B-303.5 detectable warnings that are 36 inches minimum in depth extending the full width of the pedestrian path or cut- countertops shall be installed with the bottom edge of the reflecting surface 35 inches maximum above the b. Pictograms and their field shall have a non-glare finish. Pictograms shall contrast with their field with 0 d interiors N through less than 2 inches maximum on each side placed at the edges of the pedestrian island or cut-through finish floor or ground. §11 B-603.3 either a light pictogram on a dark field or a dark pictogram on a light field. §11 B-703.6.2 U TURNING SPACE median, and separated by 24 inches minimum of walking surface without detectable warnings. 9. Coat hooks shall be located within one of the reach ranges specified in Section 11 B-308. Shelves shall be c. Pictograms shall have text descriptors located directly below the pictogram field.Text descriptors shall 9 � 0 §11 B-247.1.2.3, §11 B-705.1.2.3 located 40 inches minimum and 48 inches maximum above the finish floor. Medicine cabinets shall be comply with 11 B-703.2 Raised Characters, 11 B-703.3 Braille and 11 B-703.4 Installation Height and 3: 6. Circular turning spaces shall be a space of 60 inches diameter minimum and may include knee and toe 13. Walks that cross or adjoin a route provided for vehicular traffic, such as in a street, driveway, or parking located with a usable shelf no higher than 44 inches maximum above the finish floor. §11 B-603.4 Location. §11 B-703.6.3 858 Wilshire Blvd #200 T: 323.954.8996 " clearance complying with 11 B-306 Knee and Toe Clearance. §11 B-304.3.1 facility, shall be separated by detectable warnings, curbs, railings or other elements between pedestrian areas 10. Where towel or sanitar na kin dis ensers,waste rece tacles, or other accessories are rovided in toilet S The installation height and location of Pictogram signs shall be per§i i B-703.4.1 Y p p p p os Angeles, CA 90036 F: 323.954.8965 n 7. T-Shaped turning spaces shall be a T-shaped space within a 60 inch square minimum with arms and base and vehicular areas. §202, §11 B-247.1.2.5,§11 B-705.1.2.5 facilities, at least one of each type shall be located on an accessible route. All operable parts, including coin 29. Symbols shall comply with the following: 1 36 inches wide minimum. Each arm of the T shall be clear of obstructions 12 inches minimum in each 14. Detectable warnings provided to separate walks that cross or adjoin a route provided for vehicular traffic, such slots, shall be 40 inches maximum above the finish floor. Bab changing stations are not required to complya. Doorways leading to toilet rooms and bathing rooms shall be identified by a geometric symbol complying ww.valerioinc.com * info@valerioinc.com direction and the base shall be clear of obstructions 24 inches minimum. §11 B-304.3.2, Figure 11 B-304.3.2 as in a street, driveway, or parking facility, shall be 36 inches in width and continuous at the boundary between with Section 11 B-603.5 (See exception) §i i B-603.5 y g g q with 11 B-703.7.2.6 Toilet and Bathing Facilities Geometric Symbols. The symbol shall be mounted at 58 the pedestrian areas and vehicular areas. §202, §11 B-247.1.2.5,§11 B-705.1.2.5 11. Toilet and bathing rooms within guest rooms that are not required to provide mobility features complying with inches minimum and 60 inches maximum above the finish floor or ground surface measured from the 0 KNEE AND TOE CLEARANCE 15. Provide detectable warning details showing compliance with the following: Section 11 B-806.2 Guest Rooms with Mobility Features shall provide all toilet and bathing fixtures in a centerline of the symbol. Where a door is provided the symbol shall be mounted within 1 inch of the a. Detectable warning surfaces at transit boarding platform edges, bus stops, hazardous vehicular location that allows a person using a wheelchair measuring 30 inches by 48 inches to touch the wheelchair vertical centerline of the door. §11 B-703.7.2.6(See exception) p 8. For lavatories and built-in dining and work surfaces required to be accessible,toe clearance shall be areas, reflecting pools,and track crossings shall comply with Section 11 B-705.1.1.3.1. §11 B-705.1.1.3 to any lavatory, urinal,water closet, tub, sauna, shower stall and any other similar sanitary installation, if b. Men's toilet and bathing facilities shall be identified by an equilateral triangle, V4 inch thick with edges 12 M provided that is 30 inches in width and 9 inches in height above the finish floor or ground for a depth of 19 b. Detectable warnings at other locations shall comply with either Section 11 B-705.1.1.3.1 or Section provided. inches long and a vertex pointing upward. The triangle symbol shall contrast with the door, either light on , v rl_ a dark back round or dark on a li ht back round. 11 B-703.7.2.6.1 °L° vAt f N inches minimum. §11B-306.2.1 11 B-705.1.1.3.2.The material used to provide visual contrast shall be an integral part of the surface. g 9 9 § ° 1 � 9. Toe clearance shall extend 19 inches maximum under lavatories for toilet and bathing facilities and 25 §11 B-705.1.1.3 c. Women's toilet and bathing facilities shall be identified by a circle, V4 inch thick and 12 inches in U ! LIC.NO. C5t inches maximum under other elements. §11 B-306.2.2 16. Detectable warning surfaces shall be yellow and approximate FS 33538 of Federal Standard 595C. diameter.The circle symbol shall contrast with the door, either light on a dark background or dark on a c 24228 y Q 10. At lavatories in toilet and bathing facilities, knee clearance shall be provided that is 30 inches in width for a §11 B-705.1.1.3 WATER CLOSERS AND TOILET COMPARTMENTS light background. §11 B-703.7.2.6.2 s E7 3IR 1s depth of 11 inches at 9 inches above the finish floor or ground and for a depth of 8 inches at 27 inches above 17. Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking d. Unisex toilet and bathing facilities shall be identified by a circle, V4 inch thick and 12 inches in diameter Tq � n the finish floor or ground increasing to 29 inches high minimum above the finish floor or ground at the front surfaces. Contrast in percent shall be determined by: 1. The water closet shall be positioned with a wall or partition to the rear and to one side. The centerline of the with a V4 inch thick triangle with a vertex pointing upward superimposed on the circle and within the OPCALV U edge of a counter with a built-in lavatory or at the front edge of a wall- mounted lavatory fixture. Contrast percent= [(B1-B2)/Bl] x 100 where water closet shall be 17 inches minimum to 18 inches maximum from the side wall or partition, except that 12-inch diameter. The triangle symbol shall contrast with the circle symbol, either light on a dark O §11 B-306.3.3, Figure 11 B-306.3(c) B1 = light reflectance value (LRV) of the lighter areas and the water closet shall be 17 inches minimum and 19 inches maximum from the side wall or partition in the background or dark on a light background. The circle symbol shall contrast with the door, either light on a N11. At dining and work surfaces required to be accessible, knee clearance shall be provided that is 30 inches in B2 = light reflectance value (LRV) of the darker area ambulatory accessible toilet compartment specified in Section 11 B-604.8.2 Ambulatory Accessible dark background or dark on a light background. §11 B-703.7.2.6.3 U) width at 27 inches above the finish floor or ground for a depth of at least 19 inches. §11 B-306.3. §11 B-705.1.1.3.2 (See exception) Compartments. Water closets shall be arranged for a left-hand or right-hand approach. 0 2. Clearance around a water closet shall be 60 inches minimum measured perpendicular from the side wall and F. COMMUNICATION ELEMENTS AND FEATURES U PROTRUDING OBJECTS ENTRANCES 56 inches minimum measured perpendicular from the rear wall. A minimum 60 inches wide and 48 inches cY) deep maneuvering space shall be provided in front of the water closet. FIRE ALARM SYSTEMS C) 12. Except for handrails, objects with leading edges more than 27 inches and less than 80 inches above the 18. Entrances shall be provided in accordance with 11 B-206.4 Entrances. Entrance doors, doorways, and gates 3. The seat height of a water closet above the finish floor shall be 17 inches minimum and 19 inches maximum o finish floor or ground shall protrude no more than 4 inches horizontally into the circulation path. Handrails shall comply with 11 B-404 Doors, Doorways, and Gates and shall be on an accessible route complying with measured to the top of the seat. Seats shall not be sprung the return to a lifted position. Seats shall be 2 30. Where fire alarm systems and carbon monoxide alarm systems provide audible alarm coverage, alarms shall � may protrude 4-12 inches maximum. §11 B-307.2, Figure 11 B-307.2 11 B-402 Accessible Routes; (See exceptions). §11 B-206.4 inches high maximum and a 3 inch high seat shall be permitted only in alterations where the existing fixture comply with 11 B-215 Fire Alarm Systems. §11 B-215.1 (See exception) N 13. Free-standing objects mounted on posts or pylons shall overhang circulation paths no more than 12 inches 19. All entrances and exterior ground-floor exits to buildings and facilities shall comply with 11 B-404 Doors, is less than 15 inches high. 31. Alarms in public use areas and common use areas shall comply with 702 Chapter 9, Section 907.5.2.3.1. CE when located from 27 to 80 inches above the finish floor or ground. §11B-307.3, Figure 11B-307.3(a) Doorways, and Gates. §11 B-206.4.1 4. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall. Where separate §11 B-215.2 CZ 14. Protruding objects shall not reduce the clear width required for accessible routes. §11 B-307.5 20. Where direct access is provided for pedestrians from a parking structure to a building or facility entrance, each grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the 32. Where employee work areas have audible alarm coverage, the wiring system shall be designed so that _> 15. Lowest edge of a sign or other obstruction,when mounted between posts or Ions separated with a clear direct access to the building or facility entrance shall comply with 11 B-404 Doors, Doorways, and Gates. dimensional requirements of Sections 11 B-604.5.1 Side Wall and 11 B-604.5.2 Rear Wall shall be permitted. visible alarms complying with 702 Chapter 9, Section 907.5.2.3.2 can be integrated into the alarm system. g g p pY p g y p y y 5. The side wall grab bars shall be 42 inches Ion minimum, located 12 inches maximum from the rear wall and u?I distance greater than 12 inches, shall be less than 27 inches or more than 80 inches above the finish floor or §11 B-206.4.2 g g §11 B-215.3 Q -I ground. §11 B-307.3, Figure 11 B-307.3(b) 21. Direct connections to other facilities shall provide an accessible route complying with 11 B-404 Doors, extending 54 inches minimum from the rear wall with the front end positioned 24 inches minimum in front of 33. Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 06 16. Vertical clearance shall be at least 80 inches high on circulation paths except at door closers and door stops, Doorways, and Gates from the point of connection to boarding platforms and all transportation system the water closet. (1 999 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1), except that the U-) 3: 0) which may be 78 inches minimum above the finish floor or ground. §11B-307.4 elements required to be accessible. Any elements provided to facilitate future direct connections shall be on an 6. The rear grab bar shall be 36 inches long minimum and extend from the centerline of the water closet 12 maximum allowable sound level of audible notification appliances complying with section 4-3.2.1 of NFPA 72 1 y r z inches minimum on one side and 24 inches minimum on the other side. 1 - 17. Guardrails or other barriers with a leading edge located 27 inches maximum above the finish floor or ground accessible route connecting boarding platforms and all transportation system elements required to be ( 999 edition) shall have a sound level no more than 110 dB at the minimum hearing distance from audible N > shall be provided where the vertical clearance on circulation paths is less than 80 inches high. §11 B-307.4, accessible. §11 B-206.4.4.2 (See exception) 7. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with Section appliance. In addition, alarms in guest rooms required to provide communication features shall comply with ,Amaxx L +-I 11 B-309.4 Operation except they shall be located 44 inches maximum above the floor. Flush controls shall sections 4-3 and 4-4 of NFPA 72 (1999 edition) or sections 7.4 and 7.5 of NFPA 72 (2002 edition) and W Q M O Figure 11 B-307.4 be located on the open side of the water closet except in ambulator accessible compartments complying (� _P 18. Where a guy support is used within either the width of a circulation path, a vertical guy brace, sidewalk guy TECHNICAL REQUIREMENTS FOR ACCESSIBLE ROUTES p p Y p Chapter 9, Sections 907.5.2.1 and 907.5.2.3. §i i B-702.1 Q W or similar device shall be used to prevent a hazard or an overhead obstruction. §11 B-307.4.1, Figure with Section 11 B-604.8.2 Ambulatory Accessible Compartments. w I 11 B-307.4.1 22. Accessible routes shall consist of one or more of the following components:walking surfaces with a running 8. Toilet paper dispensers shall comply with Section 11 B-309.4 Operation and shall be 7 inches minimum and 9 J Uj >- (-) Z U Z slope not steeper than 1:20 (5%), doorways, ramps, curb ramps excluding the flared sides, elevators, and inches maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the W F � REACH RANGES platform lifts. §1113-402.2 dispenser shall be below the grab bar, 19 inches minimum above the finish floor and shall not be located I j j 2i cc z z X ° behind the grab bars. Dispensers shall not be of a type that control delivery or that does not allow continuous 23. The running slope of walking surfaces shall not be steeper than 1:20 (5%). The cross slope of walking 2i 0 - O Cn 19. Electrical controls and switches intended to be used by the occupant of a room or area to control lighting and surfaces shall not be steeper than 1:48 (2.083%). §11 B-403.3 paper flow. Q p CC � Q 24. Except at turns or passing spaces, the clear width of walking surfaces shall be 36 inches minimum. 9. Wheelchair accessible toilet compartments shall meet the requirements of Sections 11 B-604.8.1 Wheelchair Z �' Q T receptacle outlets, appliances or cooling, heating and ventilating equipment shall be located within allowable p p g p 9 O T__ 11 B-403.5.1 Accessible Compartments and 11 B-604.8.3 Coat Hooks and Shelves. Compartments containing more than � � r reach ranges. Low reach shall be measured to the bottom of the outlet box and high reach shall be § one plumbing fixture shall comply with Section 11 B-603 Toilet and Bathing Rooms. Ambulatory accessible U U N () ---i o measured to the top of the outlet box. §11 B-308.1.1 25. The clear width for walking surfaces in corridors serving an occupant load of 10 or more shall be 44 inches compartments shall comply with Sections 11 B-604.8.2 Ambulatory Accessible Compartments and Lu 0 LU O O z N 20. Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles minimum. §11 B-403.5.1 exception 2 11 B-604.8.3 Coat Hooks and Shelves. O O 6 shall be located within allowable reach ranges. Low reach shall be measured to the bottom of the outlet box 26. The clear width for sidewalks and walks shall be 48 inches minimum. §11 B-403.5.1 exception 3 10. Wheelchair accessible compartments shall be 60 inches wide minimum measure perpendicular to the side 0= 0 O ~ Q � and high reach shall be measured to the top of the outlet box. §11 B-308.1.2 27. The clear width for aisles shall be 36 inches minimum if serving elements on only one side, and 44 inches wall, and 56 inches deep minimum for wall hung water closets and 59 inches deep minimum for floor 0 0- r W W N 21. High forward reach that is unobstructed shall be 48 inches maximum and the low forward reach shall be 15 minimum if serving elements on both sides. §11 B-403.5.1 exception 4 inches minimum above the finish floor or ground. §11 B-308.2.1, Figure§11 B-308.2.1 28. The clear width for accessible routes to accessible toilet compartments shall be 44 inches except for door mounted water closets measured perpendicular to the rear wall. Wheelchair accessible compartments for 22. High forward reach shall be 48 inches maximum where the reach depth is 20 inches or less and 44 inches opening widths and door swings. §1113-403.5.1 exception 5 children's use shall be 60 inches wide minimum measured perpendicular to the side wall, and 59 inches STORE #: 9287 deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall. p maximum where the reach depth exceeds 20 inches. High forward reach shall not exceed 25 inches in 11. In a wheelchair accessible compartment with an in-swing door, a minimum 60 inches wide by 36 inches deep PROJECT #: 23544-077 n depth. §11 B-308.2.2, Figure§11 B-308.2.2 DOORS, DOORWAYS, AND GATES maneuvering space shall be provided in front of the clearance required in Section 11 B-604.8.1.1 Wheelchair C) 23. High side reach shall be 48 inches maximum and the low side reach shall be 15 inches minimum above the Accessible Compartment Size. ISSUE DATE: 03-12-21 finish floor where the side reach is unobstructed or the depth of any obstruction does not exceed 10 inches. 29. Doors, doorways, and gates providing user passage shall be provided in accordance with 11 B-206.5 Doors, 12. In a wheelchair accessible compartment with a side-openingdoor, either in-swinging or out-swinging, a SR. DESIGN MANAGER: JESSICA RAMOS N g §11 B-308.3.1, Figure§11 B-308.3.1 Doorways, and Gates. §11 B-206.5 minimum 60 inches wide and 60 inches deep maneuvering shall be provided in front of the water DESIGN MANAGER: JESSICA RAMOS 4 24. High side reach shall be 46 inches maximum above the finish floor or ground where the high side reach is 30. Doors, doorways, and gates that are part of an accessible route shall comply with 11 B-404 Doors, Doorways, closet. 0 over an obstruction more than 10 inches but not more than 24 inches in depth.§11 B-308.3.2, Figure and Gates. §11 B-404.1 13. In a wheel chair accessible compartment with end-opening door(facing water closet), either in-swinging or CHECKED BY: LILY JUMANAN o §11 B-308.3.2 31. Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route. §11 B-402.2.1 out-swinging, a minimum 60 inches wide and 48 inches deep maneuvering space shall be provided in front L_ 25. Obstructions for high side reach shall not exceed 34 inches in height and 24 inches in depth. 32. At least one of the active leaves of doorways with two leaves shall comply with 11 B-404.2.3 Clear Width and of the water closet. Revision Schedule §11 B-308.3.2, Figure§11 B-308.3.2 11 B-404.2.4 Maneuvering Clearances. §11 B-404.2.2 14. Toilet compartment doors, including door hardware, shall comply with Section 11 B-404 Doors, Doorways, Q 26. Obstructed high side reach for the top of washing machines and clothes dryers shall be permitted to be 36 33. Door openings shall provide a clear width of 32 inches minimum. Clear openings of doorways with swinging and Gates except that if the approach is from the push side of the compartment door, clearance between the Rev Date By Description U inches maximum above the finish floor. §11 B-308.3.2 doors shall be measured between the face of the door and the stop, with the door open 90 degrees. Openings door side of the compartment and any obstruction shall be 48 inches minimum measured perpendicular to 02-26-21 WY CHECK SET CZ 27. Obstructed high side reach for the operable parts of fuel dispensers shall be permitted to be 54 inches more than 24 inches deep shall provide a clear opening of 36 inches minimum.There shall be no projections the compartment door in its closed position. Door shall be located in front partition or in the side wall or maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing into the required clear opening width lower than 34 inches above the finish floor or ground. Projections into the partition farthest from the water closet. 03-12-21 WY PERMIT SET curbs. §11 B-308.3.2 clear opening width between 34 inches and 80 inches above the finish floor or ground shall not exceed 4 15. Where toilet compartment doors are located in the front partition, the door opening shall be 4 inches inches. §11 B-404.2.3 maximum from the side wall or partition farthest from the water closet. Where located in the side wall or OPERABLE PARTS 34. Minimum maneuvering clearances at doors and gates shall comply with 11 B-404.2.4 Maneuvering partition,the door opening shall be 4 inches maximum from the front partition and the door shall be self Clearances. Maneuvering clearances shall extend the full width of the doorway and the required latch side or closing. 28. Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of hinge side clearance. §11 B-404.2.4 16. A door pull complying with Section 11 B-404.2.7 Door and Gate Hardware shall be placed on both sides of SHEET TITLE: 5 the wrist. Force required to activate operable parts shall be 5 pounds maximum. §11 B-309.4 35. Swinging doors and gates shall have maneuvering clearances complying with Table 11 B-404.2.4.1. the door near the latch. Door shall not swing into the clear floor space or clearance required for any fixture. ADA NOTES n §11 B-404.2.4.1 Doors may swing into that portion of the maneuvering space which does not overlap the clearance required � 36. Doorways less than 36 inches wide without doors or gates, sliding doors, or folding doors shall have at a water closet. maneuvering clearances complying with Table 11 B-404.2.4.2. §11 B-404.2.4.2 17. At least one side partition shall provide a toe clearance of 9 inches minimum above the finish floor and 6 0 37. Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches of the inches deep minimum beyond the compartment-side face of the partition, exclusive of partition support SCALE: AN/A,HOWN &i latch side an interior doorway, or within 24 inches of the latch side of an exterior doorway, projects more than 8 members. Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces. T__ inches beyond the face of the door, measured perpendicular to the face of the door or gate. §11 B-404.2.4.3 Compartments for children's use shall provide a toe clearance of 12 inches minimum above the finish floor. SHEET NUMBER: N N r co 030