COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

HD Supply Policy No: EHS EO-02 Environmental, Health &Safety SVPPLY • Management System Page: 15 of 43 (Proprietary& Confidential Hazardous Waste Mana ement Version: 8—07/30/18 Prepared By: Approved By: Enterprise EHS Department Robert F. Peters, Jr. —Sr. Director- Environmental, Health & Safety waste oil are routinely generated) and in accordance with the guidelines found in Appendix A. 4.8.2 Satellite Accumulation Areas shall be located at or near the point of generation, and shall be under the control of the operator generating the Hazardous Waste. 4.8.3 DEAs shall set up, label and inspect Accumulation Containers in the Satellite Accumulation Areas. 4.8.4 All Satellite Accumulation Containers shall be labeled with a SECAT label with an accumulation start date that corresponds to the date the first amount of Hazardous Waste is added to the Accumulation Container. 4.8.5 Satellite Accumulation Containers shall be securely closed except when emptying or filling with Hazardous Waste. 4.8.6 Satellite Accumulation Containers shall be moved to the Central Accumulation Area within three (3) days of becoming full. When relocated to the Central Accumulation Area, a new SECAT label shall be printed and placed on the side of the container. 4.8.7 Flip-top metal containers such as those used for accumulating oily rags shall be permanently marked "Empty Daily." 4.8.8 Contents of"Empty Daily" containers shall be removed from the containers at the end of each day and placed into the corresponding SECAT-labeled Accumulation Container established in the Central Accumulation Area. 4.8.9 "Empty Daily"flip-top metal containers shall also be labeled with an "Empty Daily" label and with a label indicating the contents and hazard(s)of the contents (e.g., "Oily Rags, Flammable"). 4.9 Waste Containers 4.9.1 Leaking and non-leaking containers of Hazardous Waste shall be placed inside a lined secondary Accumulation Container(e.g., a lined, plastic bucket or an Accumulation Bin)that has a capacity of at least five (5)gallons (18 liters) and is labeled with a SECAT label or on an emergency basis placed on or in a device or structure designed to contain a liquid spill and with a capacity of at least 110% of the stored liquid. 4.9.2 SECAT labels shall not be applied directly to any container smaller than five (5) gallons. 4.9.3 SECAT labels shall be applied to all Accumulation Containers, to original manufacturer's containers if they are not leaking and are five (5) gallons (18 liters) in size or greater, and to boxes used for the accumulation of intact fluorescent lamps.. Any printed copy of this document is an uncontrolled document. The current version is available on the HD Supply Corporate EHS Intranet.