COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

0 9 18. Feed clip cord through clip cord sleeve starting with the 1/4in plug end and feeding through to the other end{let 1/4in plug rest on your chair o'r an otherwise unused work surface as you feed the rest of the cord through if necessary) 19.Cover the contact points with the clip cord cover and let each poke through the cover 20.With 1/4in plug end in ungloved hand,plug dip cord into power supply,without touching the top of any barrier 21.With covered end in gloved hand,lay only the covered portion of the cord over the mayo tray 22. Place tube packs and needle packs on clean field 23. Place razor on clean field 24. Place ink caps and rinse cup(s)on clean field 25.Using one handed technique,open A&D ointment and squeeze contents onto clean field 26. Secure ink caps and rinse cup(s)to clean field with A&D ointment 27. Pour necessary amount of stencil stuff onto work area 28. Remove glove 29.Bring client to station(if they aren't there already there) 30.Wash hands 31. Don two cloves 32. Clean area of the body to be tattooed with paper towel and soap(everywhere that may be touched. 33.Use soap and disposable razor to shave the area 34.Place the razor back into the plastic shield and place on mayo tray with one hand(this will be wrapped up with the tube and other items on mayo tray during breakdown process) 35.Wipe away any excess soap and/or hair 36.Use alcohol to wipe the area before applying the stencil 37.Apply thin layer of stencil adhesive 38.Line up and place stencil, ensuring it is straight and even,taking the contours of the body into consideration 39.Place stencil,stencil side up, onto mayo tray 40. If placement is off and removal is necessary,use alcohol and a paper towel to remove stencil,let dry,apply stencil stuff,then re-apply stencil 41.Let dry 5-10 minutes 42. Remove gloves 43.Wash or sanitize hands 44. Pour ink(s)into caps(cover the top of each bottle with paper towel to shake before pouring) 45. Fill rinse cup(s)with distilled water 46. Don two gloves 47. Open tube pack(s)and needle pack(s) 48..Place needle in tube 49.Keeping tube and needle together,place needle bar loop,then tube,through machine bag and through front vice on machine 50.Without ever placing hands inside the machine bag 51. Place needle loop over rubber grommet and slide down onto armature bar 52.Move rubber bands so they lay over the needle bar to hold it in place 53.Adjust needle and tube as necessary 54.Tighten front vice to hold tube in place 55.Attach clip cord