Laserfiche WebLink
15. Pull one clip cord cover <br /> 16. Bag the alcohol and green soap/Dr. Bronner's bottles starting from the bottom of the bottle <br /> 17. Bag machine(s) <br /> 18. Feed clip cord through clip cord sleeve starting with the 1/4in plug end and feeding <br /> through to the other end(let 1/4in plug rest on your chair or an otherwise unused work <br /> surface as you feed the rest of the cord through if necessary) <br /> 19. Cover the contact points with the clip cord cover and let each poke through the cover <br /> 20. With 1/4in plug end in ungloved hand, plug clip cord into power supply, without touching <br /> the top of any barrier <br /> 21. With covered end in gloved hand, lay only the covered portion of the cord over the mayo <br /> tray <br /> 22. Place tube packs and needle packs on clean field <br /> 23. Place razor on clean field <br /> 24. Place ink caps and rinse cup(s)on clean field <br /> 25. Using one handed technique, open A&D ointment and squeeze contents onto clean field <br /> 26. Secure ink caps and rinse cup(s)to clean field with A&D ointment <br /> 27. Pour necessary amount of stencil stuff onto work area <br /> 28. Remove glove <br /> 29. Bring client to station(if they aren't there already there) <br /> 30. Wash hands <br /> 31. Don two cloves <br /> 32. Clean area of the body to be tattooed with paper towel and soap (everywhere that may be <br /> touched. <br /> 33. Use soap and disposable razor to shave the area <br /> 34. Place the razor back into the plastic shield and place on mayo tray with one hand (this will <br /> be wrapped up with the tube and other items on mayo tray during breakdown process) <br /> 35. Wipe away any excess soap and/or hair <br /> 36. Use alcohol to wipe the area before applying the stencil <br /> 37. Apply thin layer of stencil adhesive <br /> 38. Line up and place stencil, ensuring it is straight and even, taking the contours of the body <br /> into consideration <br /> 39. Place stencil, stencil side up, onto mayo tray <br /> 40. If placement is off and removal is necessary, use alcohol and a paper towel to remove <br /> stencil, let dry, apply stencil stuff, then re-apply stencil <br /> 41. Let dry 5- 10 minutes <br /> 42. Remove gloves <br /> 43. Wash or sanitize hands <br /> 44. Pour ink(s)into caps(cover the top of each bottle with paper towel to shake before <br /> pouring) <br /> 45. Fill rinse cup(s)with distilled water <br /> 46. Don two gloves <br /> 47. Open tube pack(s) and needle pack(s) <br /> 48. Place needle in tube <br /> 49. Keeping tube and needle together, place needle bar loop, then tube, through machine bag <br /> and through front vice on machine <br />