Laserfiche WebLink
0 0 _ _ 112071&11*x111117 4 <br />Cr7�1j717_1� 7�:1'/�7� <br />Step <br />Action <br />Isolate, Evacuate and <br />Isolate spill area. Evacuate everyone from the area surrounding <br />Secure Area <br />spill, except for those responsible for the spill cleanup. Secure <br />area. <br />PPE <br />If not already worn, put on personal protective equipment <br />Contain Spill <br />Stop the flow of hazardous material. <br />Confine Spill <br />Confine the spill to initial spill area using appropriate control <br />equipment and material. <br />Neutralize Spill <br />Slowly apply GLUTE-OUT 11 to spilled material (start at <br />perimeter and work inwards). Completely blanket the spilled <br />material. DO NOT MIX. Allow to stand for complete <br />polymerization process, according to the manufacture's <br />direction, usually a maximum of 15 minutes. Vapors are <br />eliminated after 3 to 4 minutes. <br />Spill Area Cleanup <br />Spill Waste: Scoop up waste material, pads, pillows and any <br />other materials used to clean the spill and put them into a <br />leak proof container. Label the container with name of the <br />hazardous material. Wipe up residual material. Wipe spill <br />area surface 3 times with a detergent solution. Rinse with <br />clean water. <br />• Reusable Spill Supplies: (e.g. goggles, shovels, etc.) <br />Collect supplies and remove gross contamination. Wipe <br />surfaces so they are free of visible contamination. Place into <br />separate container for equipment that will be thoroughly <br />washed and decontaminated. <br />Disposal Procedures <br />Important: Check with the EH&S or EVS for appropriate waste <br />determination and disposal methods. <br />Reporting <br />Follow appropriate internal and external spill notification <br />procedures. <br />Safety Management Program 2. <br />Attachment EC.HZ.056A <br />