Laserfiche WebLink
Guide for Appliance Recyclers June 2004 <br /> • Step 4: Remove the key (sometimes a screw or a pressure-fit tab) that holds the <br /> gas burner assembly in place. <br /> Source:Vermont Agency of Natural Resources,Environmental Assistance Division <br /> (www.anr state.vL us ttc/eadhnercury/apeman.pM <br /> Step 5: Now that the gas burner assembly is loose, disconnect the gas feed line <br /> from the gas safety valve by loosening the fitting with a crescent wrench or cutting <br /> the gas line. Likewise, disconnect the gas safety valve from the gas burner <br /> assembly. <br /> Source:Vermont Agency of Natural Resources,Environmental Assistance Division <br /> (www.enr state.vt.us/dec/eadhnercury/appman.pM <br /> Step 6: Disconnect the gas feed line from the pilot light assembly by loosening or <br /> cutting it. Sometimes there are two feed lines; if so, both should be disconnected. <br /> Source.,Vermont Agency of Natural Resources,Environmental Assistance Division <br /> (www.anr state.vt.us/dedead"ercury/appman.pdo <br /> 19 <br />