Laserfiche WebLink
fi <br />InSUlatiQn ��� <br />Insutatiori of heat exchangers, pipework and exhaust gas silencer is not included in our scope of supply and <br />must be provided locally. <br />First filling <br />The first filling of genset, (lube oil, engine jacket water, anti freeze-, anti corrosive agent, battery acid) is not <br />included in our scope of supply. <br />The composition and quality of the used consumables are to be strictly monitored in accordance with the <br />"Technical Instructions" of GE JENBACHER. <br />Suitable bellows and flexible connections must be provided locally for all connections. <br />Cables from the genset must be flexible. <br />5.02 Factory tests and inspections <br />The individual module components shall undergo the following tests and inspections: <br />5.02.01 Engine tests <br />Carried out as combined Engine- and Module test according to DIN ISO 3046 at GE Jenbacher test bench. <br />The following tests are made at 100%, 75% and 50% load, and the results are reported in a test certificate: <br />• Engine output <br />• Fuel consumption <br />• Jacket water temperatures <br />• Lube oil pressure <br />• Lube oil temperatures <br />• Boost pressure <br />• Exhaust gas temperatures, for each cylinder <br />5.02.02 Generator tests <br />Carried out on the premises of the generator supplier. <br />PKIM111 art ST m C: <br />The engine will be tested with natural gas (Russian Natural gas with methane number 94). The technical data <br />according to the specification can only be demonstrated to a certain extent with the available natural gas. <br />Carried out as combined Engine- and Module test commonly with module control panel at GE Jenbacher test <br />bench, according to ISO 8528, DIN 6280. The following tests are made and the results are reported in a test <br />certificate: <br />Visual inspection of scope of supply per specifications. <br />• Functional tests per technical specification of control system. <br />• Starting in manual and automatic mode of operation <br />• Power control in manual and automatic mode of operation <br />• Function of all safety systems on module <br />• Measurements at 100%, 75% and 50% load: <br />• Frequency <br />• Voltage <br />• Current <br />19.04.2011/2 TS JGS616 E22 4160V April 19 2011 Ameresco Forward LFG-WES <br />31132 <br />