Laserfiche WebLink
., Advanced <br />Burner <br />ABUTECT..h..,.,,.. <br />CONFIDENTIAL AND PROPRIETARY <br />*Actual Dimensions determined in Design Phase and sent to customer for Review & Approval <br />Scope of Supply: <br />1 Flare unit consisting of Burner (greater than 99% Combustion Efficiency and 1.0s retention time), Fully - <br />Insulated Stack coated with Premium High Temperature Paint, and Sand Blasted/Painted Frame. Stack to <br />include test ports for emission testing. <br />3 Thermocouples for Temperature Indication and Combustion Air Regulation (positioned on stack) <br />1 Ignition unit consisting of UL -legislated burner control unit <br />- Ignition transformer (7.5kV, 100% duty ratio) and ignition electrode (pilot flame safety) <br />- UV -sensor for flame monitoring (flame safety) <br />- Propane Pilot burner with Double Solenoid Block/Bleed Valves; (Stainless Steel body & trim); <br />pressure regulator, and pressure indicator <br />1 Auxiliary Fuel (Landfill Gas) consisting of- <br />- <br />f- Minimum Start Pressure Transmitter with Digital Readout <br />- Deflagration flame arrestor (built into the system) with ATEX certification, Explosion Proof <br />Category 3 (Type RMG or equivalent); Stainless Steel <br />1 Process Gas Line (99.9% Air) consisting of- <br />- <br />f- Deflagration flame arrestor (built into the system) with ATEX certification, Explosion Proof <br />Category 3 (Type RMG or equivalent); Stainless Steel <br />1 Automatic Control System to Monitor Flare Operation, consisting of- <br />- Fully Integrated Control Panel/Cabinet (NEMA 4) <br />- Allen Bradley Micrologix 1100 PLC, or equivalent (Open Source Code) <br />- Start/Stop via local signal on Touch screen Display <br />- Status and fault display, UV -signal strength and operation status on Burner Control Unit (BCU) <br />- Operation and failure signal via potential free contacts, Reset -Button <br />- Touchscreen HMI Interface <br />- Control Panel Weather Hood <br />1 Purge Air Fan for pre -purge mounted adjacent to louvers <br />1 Sets Documentation consisting of: <br />- Operating and maintenance instructions, P&ID, General Arrangement Drawing (GAD), Control <br />Philosophy, Electrical Drawings, and Spare Part List. GAD will be supplied in AutoCAD 2000 (main <br />dimensions only). <br />Page 6 of 14 <br />Documents/Quotations/2010.203.002AM <br />11 <br />