Laserfiche WebLink
Construction Air Permit <br /> Emissions Pollutant Emission Factor PE Triggers <br /> Unit lbs/da BACT? <br /> NOx 0.15 /bhp-hr 23.91 Yes <br /> Sox 150 22mv 33.85 Yes <br /> No. 1 PMIO 0.07 /bhp-hr 11.16 Yes <br /> 3,012 bhp CO 1.80 /bhp-hr 286.86 Yes <br /> LFG-fired 20 ppmv as hexane @ <br /> IC Engine 3% oxygen outlet <br /> VOC concentration or 98% 58.80 Yes <br /> destruction efficiency <br /> by wei ht <br /> NOx 0.15 /bhp-hr 23.91 Yes <br /> No. 2 Sox 150 ppmv 33.85 Yes <br /> 3,012 bhp PM10 0.07 /bhp-hr 11.16 Yes <br /> LFG-fired CO 1.80 /bhp-hr 286.86 Yes <br /> IC Engine 20 ppmv as hexane @ <br /> VOC 3% oxygen outlet 58.80 Yes <br /> concentration <br /> NOx 0.041 lb/MMBtu 6.52 Yes <br /> sox 150 22mv 0.45 Yes <br /> PMIO 0.21b/MMBtu 2.88 Yes <br /> CO 0.21b/MMBtu 31.81 Yes <br /> Flare 20 ppmv as hexane @ <br /> 3% oxygen outlet <br /> VOC concentration or 98% 17.17 Yes <br /> destruction efficiency <br /> by weight <br /> BACT will be employed for all pollutants, except that emission levels for NOx and CO <br /> will be lower than what we believe BACT to be. Although controls are not cost-effective <br /> at these levels, Ameresco is willing to install backend controls to achieve lower emissions <br /> levels which exceed current BACT requirements. <br /> 2. Emission Offset Requirements <br /> Per Section 4.5.3 of SJVAPCD Rule 2201, offset requirements shall be triggered on a <br /> pollutant-by-pollutant basis. Unless exempted pursuant to Section 4.6, offsets shall be <br /> required if the post-project Stationary Source Potential to Emit(SSPE2) equals or <br /> exceeds the following offset threshold levels: <br /> 10 <br />