Laserfiche WebLink
4-3 <br /> ® controls can be provided from which to monitor future landfill settlement. After completion <br /> of the final cover, a settlement monument will be set on the landfill on the bench as shown <br /> on Figure 8. The monument will be used to monitor settlement within the Stage 113 partial <br /> closure area and will allow for a determination of the actual settlement that occurs over the <br /> post-closure maintenance period. <br /> Additionally, 27 CCR, Section 21090(e)(2) requires operators to produce iso-settlement <br /> maps every five years throughout the post-closure maintenance period or until settlement <br /> has ceased. Prior to an aerial survey, the monument will be surveyed for horizontal and <br /> vertical control so that an accurate disposal area topographic map can be developed. <br /> Aerial "targets" will be placed over the monument after the survey has been completed and <br /> an aerial topographic map will be generated to provide an up-to-date contour map of the <br /> Stage 1B Partial Final Closure area. The settlement and lateral movement of the <br /> monument will then be recorded. <br /> Prior to a scheduled survey of the monument, an inspection will be performed to ensure that <br /> the monument is intact and usable. The monument will be cleared of all debris and <br /> vegetation to allow for visual location of the monument and accurate readings. Should the <br /> monument be damaged or missing, a new monument will be placed at that location so that <br /> the continuity of the previous survey data will be maintained. <br /> If the monument is within an area requiring regrading and/or other reconstruction, it shall <br /> be replaced at approximately the same horizontal location and a note shall be placed to <br /> ® identify the new elevation. <br /> Forward Landfill Stage 113 Partial Final Closure/Post-Closure Maintenance Plan June 2011 <br /> SWT Engineering <br /> z:\projects\allied waste\forward\11-1014 partial fnl clsr pin\partial final closure plan document\text\sec 4.doc <br />