Laserfiche WebLink
• Verify that equipment used to unload the rolls will not damage the geotextile. <br />• Verify that rolls are wrapped in impermeable and opaque protective covers. <br />• Verify that care is used to unload the rolls. <br />• Verify that all documentation required by the Specifications has been received. <br />• Verify that each roll is marked or tagged with the following information: manufacturer's <br />name; project identification; lot number; roll number; roll dimensions. Log this <br />information on the geosynthetic receipt form. <br />• Verify that the geosynthetic receipt form is completed. <br />• Verify that materials are stored in a location that will protect the rolls from ultraviolet <br />light exposure, precipitation, mud, dirt, dust, puncture, cutting, or any other damaging or <br />deleterious conditions. <br />Any damaged rolls maybe rejected. Verify that rejected material is removed from the site or stored <br />at a location separate from accepted rolls. Geotextile rolls that do not have proper manufacturer's <br />documentation must also be stored at a separate location, until all documentation has been received <br />and approved. <br />4.3.2 Acceptance Testing <br />Tests. The QA/QC Consultant will ensure that samples are removed and forwarded to the <br />Geosynthetic CQA Laboratory for testing at a frequency of one sample per lot or one per 100,000 sq. <br />ft., whichever is more stringent, to ensure conformance to both the Specifications and the <br />Manufacturers list of guaranteed properties. The material will be sampled at the site by the QA/QC <br />Inspectors or at the manufacturing plant by an independent third party under the direction of the <br />QA/QC Consultant. <br />As a minimum, the following shall be established for each type of geotextile: <br />Weight per ASTM D5261; <br />Grab Tensile Strength per ASTM D4632 <br />Direct Shear Testing (ASTM D5321). The QA/QC Consultant shall perform a direct shear test <br />(minimum one test per project or material type) between the project specific Geotextile and textured <br />geomembrane per ASTM D5321 and as described in the Specifications. <br />0 Page 37 <br />