ARCHIVED REPORTS_1993 - Laserfiche WebLink

Home Browse Search

B The baler proposed for use at this facility is an existing baler currently used by Tracy Delta Disposal Service in their recycling programs. The baler is a 2-Ram Selco Model 2RI050 (50 HP) and is hydraulically activated for smooth and efficient movement. Bales are approximately 45 by 30 by 62 inches in size with a weight of a approximately 900 to 1,600 pounds, depending on the materials baled. The baler is capable of producing 19 to 33 tons per hour with an automatic bale strapper. SQajW'L_i= The material sorting line will consist of a pit, conveyors and picking stations. All conveyors will be heavy duty steel frames and chain-driven steel or rubber belt conveyors. Each conveyor has side skirts along each side to prevent loss of material between the moving belt and the conveyor sides. Conveyor widths range from 48 inches to 60 inches. Picking stations will be elevated approximately 14 feet above the floor with stations on each side of the conveyor. See Sheet 10 of the Preliminary Development Plans for a cross section of the sorting line. Magnetic Separator A magnetic separator will be installed in the picking line conveyor for the removal of ferrous material. This separator will either be a drum type, magnetic head pulley type or a magnetic belt and can be assembled and suspended in line, crossbelt or mounted as conveyor head pulleys. Loaders Rubber tired loaders will be used for pushing material into conveyor pits or open top trailers. They will be equipped with heavy-duty diesel engines, automatic bucket controls and sealed linkages to extend lube intervals and reduce maintenance time. Model sizes will be purchased depending on their assigned use. Trailers and Tractor Units Open top trailers with walking floors will be used for the residual waste disposal to the landfill. Initially 4 trailers and 3 tractor units will be used for the estimated initial waste transfer of 205 L-/PROJEC'r/397/NW/RSI-1.TCY Revision 1.0 30 December 15, 1993