Laserfiche WebLink
a <br /> Page 1 of 1 <br /> Natalia Subbotnikova [EH] <br /> From: Yekta, Gino[GYekta@CIWMB.ca.gov] <br /> Sent: Monday, April 21, 2008 12:47 PM <br /> To: Robert McClellon [EH] <br /> Cc: Natalia Subbotnikova [EH]; Wochnick, Michael <br /> Subject: RE: Installation of GW-1A(Corral Hollow Landfill) <br /> Hello Robert: Below is an e-mail we like to send to Mike Carroll regarding the installation of GW-1A. Please let <br /> me know if you have questions or concern regarding the content of the e-mail. The reason we like to send this e- <br /> mail is that the probe as installed is not in compliance with 27 CCR. Please let's know what you think. <br /> Thanks...Gino <br /> ---------------------------------------------------------------------------------- <br /> ---------------------------------------------------------------------------------- <br /> Hello Michael: Hope you are doing well. We have received the attached e-mail describing field notes <br /> from the LEA on the installation of GW-IA outlining the depth of the bore as well as the depth for each <br /> probe. We had also previously received the proposed design for GW-lA which had shown the depth of <br /> each probe as 15', 40', and 69' respectively. We would like to find out the reason for the discrepancies <br /> between what has been installed and what was proposed. Please call (916-341-6354) or e-mail me if <br /> you have any questions. Thanks.....Gino <br /> From: Natalia Subbotnikova [EH] [mailto:nsubbotnikova@sjcehd.com] <br /> Sent: Monday, April 14, 2008 2:01 PM <br /> To: Yekta, Gino <br /> Subject: Installation of GW-1A(Corral Hollow Landfill) <br /> Hi Gino, <br /> Attached are the photos I took during GW-1A installation at the Corral Hollow Landfill on April 10-11, 2008. <br /> Installation went smoothly. Public Works used the design we previously approved. <br /> The depth of the well-69'. <br /> Deep probe pipe-50'6" <br /> Intermediate probe pipe-266" <br /> Shallow probe pipe-10'6" <br /> 20 lbs probe pipe weight was securely bound to the side of each probe. <br /> If you have any questions, please let me know. <br /> Thanks......Natalia <br /> 4/21/2008 <br />