Laserfiche WebLink
PHASE III Random Load Checking <br /> Thehird phase of the hazardous waste screening program is a random load <br /> t p gP g <br /> checking program. The load checking shall be conducted by an inspector <br /> trained in hazardous waste detection and handling. <br /> On a random basis, the trained inspector will select a load for inspection. The <br /> driver will be asked to unload the waste at a designate location. The driver will <br /> be instructed to pull forward while unloading, so that a long, narrow windrow <br /> is formed. The inspector will then sort through the windrow, using a rake or <br /> shovel. The material will be carefully observed for the presence of any <br /> prohibited wastes in the load. The methods by which the acceptability of <br /> wastes will be determined are described below. Observations will be recorded <br /> on the data sheet for the load. If necessary photographs and samples will be <br /> taken. <br /> The load-checking inspector will complete the load checking data sheet <br /> (Attachment 1), and along with the driver, sign the form. <br /> If hazardous or other unacceptable wastes are identified, the responsible party <br /> will be notified that the wastes must be removed from the facility premises and <br /> arrangements made for their proper disposal. <br /> 5 <br />