Laserfiche WebLink
SWRCB, January 2002 Page of <br /> 9 . FILL RISER CONTAE"MNT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X <br /> Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br /> ❑ Other (Spec& <br /> Test Method Used : ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br /> ❑ Other (Sped) <br /> Test Equipment Used: Equipment Resolution: <br /> IN <br /> Fill Sum # Fill Sump # Fill Sump # fill Sump # <br /> .Sump Diameter: <br /> Sump Depth: } <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration : <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time: <br /> Initial Reading Rf : <br /> Test End Time: <br /> Final Reading (RF) : <br /> Test Duration: <br /> Change in Reading (RF-R4) : <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testing? <br /> Was sensor properly replaced and j <br /> verified functional after testing? i <br /> i <br /> Comments — (inch(de information on repairs in prior to testing, and recommended follow-up for failed tests) <br />