Laserfiche WebLink
Revision 0 LODI F =TY1PF PROCEDURES <br /> LUSTRE-CAL PF PROCEDURES <br /> 6. Associate will skim "Clean/Reclaimed PF" liquid from the PFAC's to IPC's. [Liquid is <br /> transferred from east tanks to west tanks?] <br /> 7. Associate will inspect PFAC's in the PF Room. <br /> a. Inspect the "Dirty PF" fill hose from the transfer pump in the Etch Room. Ensure <br /> that it is securely in place in the proper container. <br /> b. Determine if there is enough room in the container to receive 30% <br /> (approximately 100 gallons) from the PF Processing Tank (approximately 300 <br /> gallons) in the Etch Room. <br /> c. If there is insufficient capacity in the PFAC's, STOP. The Accumulation <br /> Containers need to be replaced prior to pumping over "Dirty PF" from the <br /> Etch Room PF Processing Tank. Contact a Waste Handler Associate and <br /> have them exchange the full PFAC for an empty PFAC in the PF Room. <br /> 8. Associate will pump "Dirty PF" from the PF Processing Tank in the Etch Room to the <br /> PFAC in the PF Room. <br /> NOTE. On the day that the PFAC's are exchanged: <br /> 1. Etch Room Associates need to go through this procedure from the beginning <br /> after the exchange has been made. <br /> 2. There will be two entries in the LOG OF PF USE; one before the exchange, <br /> and one after. <br /> Print Date 10/19/00 Page 2 of 2 <br />