Laserfiche WebLink
• HAZARD 04-ALYSIS PAG • <br /> FEATURE SAMPLING AND TESTING ANALYZED BY/DATE REVIEWED BY/DATE <br /> PRINCIPLE POTENTIAL RECOMMENDED <br /> STEPS HAZARDS CONTROLS <br /> Ladders will be secured by top, bottom and intermediate fastenings <br /> as required. <br /> Lighting Adequate lighting will be provided to insure a safe working <br /> enviroment. <br /> ------------------------------ ------------------------------------------------------------------------ <br /> _ _ _ __ <br /> Decontamination of Chemical Wear appropriate PPE (rubber gloves, eye protection, - <br /> saranax suit if <br /> Equipment splash expected, respirator if breathing zone vapors expected) . <br /> Heavy Equipment Constant employee awareness; visual/verbal contact with operators. <br /> Operation <br /> Slip/Trip/Fall Steel toed boots; removal of obstacles; daily safety meetings to <br /> i <br /> update employees on areas of concern. <br /> Tool and Equipment Instructions in proper tool use and maintenance. <br /> -------------------------------------------------------------- --------------------------------------------------------------------- -------- ------------------- <br /> Sample <br /> ---------------------------- ---------------- <br /> ---------------------------------------- <br /> Sample collection Biological hazards Inspect work area carefully and avoid placing hands or feet into <br /> concealed areas. <br /> Be alert for bees, spiders, ticks, and snakes. <br /> Confined spaces Follow procedures for confined spaces. <br /> Contacting Real-tame air monitoring will take place. Proper <br /> personal protective <br /> contaminated mat'ls clothing and equipment will be utilized. <br /> Good housekeeping will be stressed to safe guard against cross <br /> contamination of surrounding areas and eliminate safety hazards. <br /> All site personnnel will practice good personal hygiene. <br /> The work area will be demarcated. All unnecessary personnel will be <br /> kept out of the work area and in an upwind location. <br /> Cross contamination No Exclusion Zone activities are associated with this risk. <br /> Cut hazards Wear adequate hand protection. <br /> Electrical shock All electrical circuits will be deengergized and locked out. <br /> Hazard communications Label all containers as to contents (fuel cans, etc.) <br /> Obtain Material Safety Data Sheets for materials brought on site. <br /> Lighting Adequate lighting will be provided to insure a safe working <br /> enviroment. <br /> Spills/residual Absorbent material and containers will be kept available where leaks <br /> materials or spills may occur. <br />