Laserfiche WebLink
11 <br />cheeSe MelteR <br />P/N 1010983 Rev B 05/08 <br />PrograMMing (continued) <br /> 2. Press the button highlighted below to change <br />the control from Operation to Program mode. <br />“CYC” is displayed momentarily. Then press <br />an Operating Button to change that button’s <br />settings. <br />CYC <br />note: if no change is made within 10 seconds <br />at any time during the programming process, <br />all changes made up to that point are stored in <br />memory and the control reverts to operation <br />mode. <br /> 3. The unit displays the current setting for total <br />cycle time in minutes. Use the buttons high- <br />lighted below to change this setting. <br />00 <br /> 4. Press the highlighted button below to accept <br />the total cycle time in minutes on the display. <br />00 <br /> 5. The unit then displays the current setting for <br />total cycle time in seconds. Use the buttons <br />highlighted below to change this setting. <br /> 21 <br /> 6. Press the highlighted button below to accept <br />the total cycle time in seconds on the display. <br /> 21