COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

W OWP IMPORTANT:To help prevent spillage from an underground storage tank, make sure the delivery equipment is well-maintained,that there is a proper connection, and that the fill adaptor is tight. Delivery personnel should inspect delivery elbows and hoses for damage and missing parts. A CAUTION: Use only original FFS parts. Substituting non-FFS parts could cause the device to fail, which could create a hazardous condition and/or harm the environment. A WARNING: Follow all codes that govern how you install and service this product and the entire system.Always lock out and tag electrical circuit breakers while installing or servicing this equipment and related equipment.A potentially lethal electrical shock hazard and the possibility of an explosion or fire from a spark can result if the electrical circuit breakers are accidentally turned on while you are installing or servicing this product. Refer to this manual (and documentation for related equipment)for complete installation and safety information. A WARNING: Before you enter a containment sump, check for the presence of hydrocarbon vapors. Inhaling these vapors can make you dizzy or unconscious, and if ignited, they can explode and cause serious injury or death. Containment sumps are designed to trap hazardous liquid spills and prevent environmental contamination, so they can accumulate dangerous amounts of hydrocarbon vapors. Check the atmosphere in the sump regularly while you are working in it. If vapors reach unsafe levels, exit the sump and ventilate it with fresh air before you resume working. Always have another person standing by for assistance. A WARNING: Follow all federal, state, and local laws governing the installation of this product and its associated systems. When no other regulations apply,follow NFPA codes 30, 30A, and 70 from the National Fire Protection Association. Failure to follow these codes could result in severe injury, death, serious property damage, and/or environmental contamination. A WARNING: Always secure the work area from moving vehicles.The equipment in this manual is usually mounted underground, so reduced visibility puts service personnel working on it in danger from moving vehicles that enter the work area.To help prevent this safety hazard, secure the area by using a service truck (or some other vehicle) to block access to the work area. A WARNING: This product contain a strong magnet. Make sure it does not come into the vicinity of a person with a pacemaker or similar medical aid.The magnetic field associated with this product can adversely affect such devices. A WARNING: If you are working with drop tubes that have been exposed to fuel or other flammable substances, allow these substances and any vapors to dissipate in a well-ventilated area for an hour before you perform any procedures. A WARNING: Discharge to ground before putting into service and ensure valve is properly grounded while in service. A WARNING: When inserting the drop tube/valve assembly into the tank riser pipe, use caution not to forcefully impact the tank riser pipe. When raising/lowering the drop tube/valve assembly while inside the tank riser pipe, do so in a slow, controlled manner. A WARNING: It is the responsibility of the end user of this product to evaluate each installation location for the following potential ignition sources: lightning, high frequency radio waves, electromagnetic radio waves, ionizing radiation, and ultrasonic sound waves. If any of these potential ignition sources are identified, protective systems/measures shall be implemented. 2 PNO —