Laserfiche WebLink
OCT 16 '03 15:06 FR COSTCO GASOLINE 425 427 7119 TO 912094683433 P.05i09 <br />-1"CS ltiel Filter ]4 --ding Program BMX <br />10. Slowly loosen the old filter allowing the residual gasoline contained in the <br />housing to drain into the catch -cup or bucket. <br />11. Pour free product (gasoline) from the filter and catch -cup into the recycle <br />container. <br />12. Place the empty, drained filter into a transport container to be cleaned later. <br />13. Carefully remove the dispenser screen. Flush to remove any grit or debris <br />and replace. <br />14. Attach the new filter to the dispenser following the manufacturer's <br />instructions. <br />15. Carefully set the shear valves to the open position, being aware of any <br />leakage that might occur. If leakage is present, immediately set the shear <br />valves to the closed position and tighten the appropriate connections. <br />16. Repeat the steps for removing filters until all necessary filters have been <br />changed. <br />17. If any spillage occurred while removing the old filter, spray a light mist of <br />F1 186-2 solution into the dispenser. This will suppress vapors generated <br />from, the product spillage. Spray at least as much volume as was spilled. Use <br />adsorbent pads to remove excess liquid from the sump. <br />Filter Cleaning <br />18. Carry the filter transport container to the data shack or other selected spot <br />where the filter cleaning equipment is set up. <br />19.IWORTANT! W Attach grounding wire to bare metal on the data <br />shack (the anchor bolts work well) or ]metal conduit using the alligator <br />clip! <br />-4- <br />