WORK PLANS - Laserfiche WebLink

Home Browse Search

E Itr GLOBAL SPEC TO INSTALL WE DO IT ALL DOORS AND SECTIONS Door and door panel to be of the same general construction and insulation as wall and ceiling panels. Door shall be of the inset type. Direction of swing to be specified. A heated vent shall be provided in or adjacent to all freezer door sections. Door to feature a polyvinyl chloride (PVC) bulb type, double lined magnetic core gasket on three sides for a positive seal. Door to have adjustable vinyl wiper gasket for seal at threshold. All gaskets to be easily replaceable and resistant to damage from oils, fats, water, and detergents. Doors can be provided in the following sizes: 30" X 78" 34" X 78" 42" X 84" 48" X 84" 54" X 84" 60" X 96" 72" X 108" HINGES (Doors less than 60" in width) Shall be cam-rise hinge consisting of a pressure die cast strap and flange with a brushed satin surface chrome finish and carbon steel pin. Bearing to be composed of cam and follower made of self-lubricating nylon (Zytel). . (Doors 60" or greater in width) Shall be heavy-duty strap style cam-rise with pressure die cast flange and cold rolled steel strap and pin. Bearing to be composed of composite, double-helix cam and follower. Flange to be direct chrome plated. Strap to be zinc plated. LATCH Shall be pressure die cast body with a brushed satin surface chrome finish. Latch to be provided with provision for padlock (padlock not provided). Latch to have recessed inside safety release to prevent entrapment. DIAL THERMOMETER Shall be flush mounted in door section. Dial thermometer to have 2" diameter face and a temperature range of-401, to +60° F. Finish to be polished chrome. ANTI-CONDENSATE HEATERS Freezer door sections are equipped at both sides and top with U.L. approved concealed fiberglass-silicone heater wires. A sill heater is located in bottom of door to avoid damage caused by loading at threshold plate, and to insure contra-ambient control by locating heat at the precise location of thermal transfer. A 12 ga SS threshold cover plate (sill) is supplied to cover the breaker strip running beneath the door. The heater wire is easily replaceable. SECTION 1/PAGE 3 Due to continuous improvement programs, specifications are subject to change without notice.